The 120W speed reduction motor provides high efficiency for your work and allows you to save a lot of working time. The governor with high accuracy and wide speed range allows you to adjust the right speed for different applications. And with its high torque, it will be your powerful working partner! This product is made of high-quality medium carbon tempered steel, with high hardness, strong wear resistance, anti-corrosion, anti-rust performance, and long service life. The rated speed of a 120W motor can reach 1350rpm, ensuring high efficiency and saving you a lot of working time. Built-in cooling fan, bottom cooling window design, and stable performance of pure purple copper coil can effectively dissipate heat, thus ensuring long-term stable operation. The speed regulator with high precision and wide speed range allows you to adjust different speeds according to different applications to achieve the expected results. This product has flexible normally open and normally closed control system by changing wires or adding switches, providing you with higher freedom of use. The stable pure purple copper coil and gear set consisting of full ball bearings and medium carbon tempered steel gears can effectively increase the torque of the motor, providing you with smoother and more powerful operation. The surface of the product is smooth and flat to clean. You can easily wipe off the dust and stains on the surface with a rag. Stator: Both ends of the stator are equipped with ball-bearing axle wheels, resulting in low friction, temperature, and noise. Fine Fittings: The fine fittings make the top cover and bottom cover tightly combined, thus making the rotor run stably. Gearbox: The gearbox shaft keyway is equipped with fixed key pins, which are stable and more durable. The slower the speed of the motor in the gearbox deceleration. The greater the torque. The slower the speed is regulated by the governor. The smaller the torque will be. Speed regulation safety zone. The motor has a small load and operates continuously for a long time. The speed controller should not adjust the speed for a long time below 50%. The motor has a high load and operates continuously for a long time. The speed controller should not adjust the speed for a long time below 70%. This product can be used in packaging, printing, textile, printing and dyeing, chemical, food, pharmaceutical, and other engineering machinery, as well as advertising, office, petrochemical, instrumentation, stage lighting, transmission, automated warehouse, parking lot, and other equipment. Process: Plastic Spraying, One-piece Forming, Heat Treatment. Type: Medium Hollow Motor. Reduction Ratio: 1:9-1:600 optional. Output: 90° Right Angle Output. Gross Weight: 8kg/ 17.64 lbs. 1 Speed Reduction Motor. Our motors do not include the bracket. Please do not plug and unplug the power cord with the power on. Please do not knock on the machine. The speed reduction motor is composed of a motor and a speed reduction gear. Different speed ratios can achieve different speed regulation ranges, and they have different strengths. The speed of the output shaft is different under different reduction ratios. When the gearbox decelerates, the higher the reduction ratio, the higher the force. The slower the speed regulated by the governor, the lower the torque. The motor can run for a long time within the safe speed regulation range. The safe speed regulation range for small loads is 50% of full speed-full speed. The safe speed regulation range for large loads is 70% of full speed-full speed. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. There are NO EXCEPTIONS! OR, you may choose to have a replacement. We will reply you ASAP. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have. Our customer-oriented service strives for. Business time: GMT8 (9:00-18:00) from Monday to Friday.