https://maxonmotorspeedcontroller.com Thu, 16 Apr 2026 17:22:32 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://maxonmotorspeedcontroller.com/2019/06/25/13-hp-variable-speed-dc-drive-kit-motor-control-pulleys-belt-250-900-rpm-sale/ https://maxonmotorspeedcontroller.com/2019/06/25/13-hp-variable-speed-dc-drive-kit-motor-control-pulleys-belt-250-900-rpm-sale/#comments Tue, 25 Jun 2019 08:30:49 +0000 http://maxonmotorspeedcontroller.com/2019/06/25/13-hp-variable-speed-dc-drive-kit-motor-control-pulleys-belt-250-900-rpm-sale/ […]]]>













This is a 1/3 HP Permanent Magnet DC Motor with Solid State Electronic Variable Speed Control + 1″ Drive Pulley + 6″ Driven Pulley + 24 V-belt. Here are the specs. 1/3 HP Permanent magnet DC motor. 250 to 900 RPM no-load speed range when used with 1″ drive pulley to 6″ driven pulley with belt. Clockwise rotation (facing end of motor shaft) – not reversible. TEFC (totally enclosed fan cooled). 2 Mounting options on motor face as follows. (4) Screws on the motor face in a 2-5/32 (55mm) circle 90 degrees apart. (2) Openings on motor mounting bracket approximately 3-3/4″ (95mm) apart to accept up to 5/16″ (8mm) diameter bolts. 5/16″ (8mm) Diameter x 1-3/4″ (45mm) long output shaft with flat for set screw. Motor body is 3-1/32″ (77mm) diameter x 6-1/16″ (154mm) long. DC Motor control (solid state). Input power: 110 Volts / 2.3 amps / 1 Ph / 60 Hz. Controls motor speed from approximately 25 0 no-load RPM (slightly delayed soft start) to 900 no-load RPM when used with the puleys and belt provided 1 pulley on motor… 6 pulley on driven device. Control box measures 5-1/8″ long x 3-1/8″ wide x 2-3/8 deep. With safety switch, variable speed control knob, built-in resettable circuit breaker, and fuse & extra fuse. With miscellaneous mounting hardware (nuts, bolts, washers). Heavy duty 6 ft grounded cord. Motor produces its best torque in the top half of its speed range. With 1 nylon drive pulley… With 6 nylon & aluminum driven pulley… With 24″ 2L V-belt (1/4″ width)… This is a complete motor / control package ready to be mounted to your lathe, drill, mill, or any other machine requiring a 1/3 HP variable speed drive. This system is brand new but will come in generic packaging. Thanks for stopping by. Failure to do so may cause injury. The item “1/3 HP Variable Speed DC Drive Kit Motor Control Pulleys Belt 250-900 RPM SALE” is in sale since Saturday, February 4, 2017. This item is in the category “Business & Industrial\Automation, Motors & Drives\Drives & Starters\Drives & Motor Controls\Speed Controls”. The seller is “thirddevil” and is located in Jacksonville, Florida. This item can be shipped worldwide.

• Control Type: Electronic Variable Speed Control EVS
• Suitable for: Variable speed control above 1480 RPM
• Drive components included: 1″ Drive Pulley + 6″ Driven Pulley + 24″ 2L V-belt
• Model: 1/3 HP DC Motor and Variable Speed Control
• Modified Item: No
• Custom Bundle: No
• Speed Range: 250 – 900 RPM when used with pulleys included
• Motor Type: 1/3 HP Permanent Magnet DC Motor
• MPN: Does Not Apply
• Brand: Unbranded

]]> https://maxonmotorspeedcontroller.com/2019/06/25/13-hp-variable-speed-dc-drive-kit-motor-control-pulleys-belt-250-900-rpm-sale/feed/ 0 https://maxonmotorspeedcontroller.com/2019/06/08/12-hp-variable-speed-dc-drive-kit-motor-control-pulleys-belt-750-5415-rpm-new/ https://maxonmotorspeedcontroller.com/2019/06/08/12-hp-variable-speed-dc-drive-kit-motor-control-pulleys-belt-750-5415-rpm-new/#comments Sat, 08 Jun 2019 07:56:53 +0000 http://maxonmotorspeedcontroller.com/2019/06/08/12-hp-variable-speed-dc-drive-kit-motor-control-pulleys-belt-750-5415-rpm-new/ […]]]>













This is a brand new 1/2 HP DC Motor with Solid State Variable Speed Control + (2) Step Pulleys + 3-Rib Belt + Mounting Plate + Hex Keys & Mounting Bolts/Nuts/Washers. Please choose between 24″, 30″, 36″, 42″ or 48 belt length… Here are the specs. When assembled with the (2) step pulleys and belt, this drive runs at 750 to 5415 RPM depending on belt position. 1/2 HP DC brushed type motor. Motor speed range with NO pulleys/belt: 1425 to 2850 No-load RPM. Lowest speed range WITH pulleys/belt: 750 to 1500 no-load RPM. Highest speed range WITH pulleys/belt: 2708 to 5415 no-load RPM. Clockwise rotation (facing end of motor shaft). Motor can be mounted via (3) 6mm Screws on the motor face in a 2-1/2 (64mm) circle 120 degrees apart. Motor mounting plate has a 5/16″ hole and a 5/16″ x 1-1/4″ long slot that are 5-1/2″ apart. Motor shaft is 591 (15mm) diameter. The motor shaft is 2-7/16 (62mm) long overall. Motor body is 3-1/8″ (79mm) diameter x 7-1/2″ (191mm) long. DC Motor control (solid state). Input power: 120 Volts / 4.5 amps / 1 Ph / 60 Hz. The three steps on the pulley are 29mm, 46.5mm, and 54.5mm diameter. The 3-rib belt is 5/16″ wide x 24″, 30″, 36″, 42″, or 48″ long… Control box measures 6″ wide x 4-3/4″ tall x 3 deep + projections for switches and cord grips. With safety switch, variable speed control knob, & built-in resettable circuit breaker. Heavy duty 6 ft grounded cord plus 3 ft cord between motor & control. With screws to mount control box. With (3) motor mounting socket head cap screws/washers. With 2 hex keys. Motor produces its best torque in the top half of its speed range. This is a complete motor / control package ready to be mounted to your lathe, drill, mill, or any other machine requiring a 1/2 HP variable speed drive. This system is brand new but will come in generic packaging. Thanks for stopping by. Failure to do so may cause injury. The item “1/2 HP Variable Speed DC Drive Kit Motor Control Pulleys Belt 750-5415 RPM New” is in sale since Monday, February 6, 2017. This item is in the category “Business & Industrial\Automation, Motors & Drives\Drives & Starters\Drives & Motor Controls\Speed Controls”. The seller is “thirddevil” and is located in Jacksonville, Florida. This item can be shipped worldwide.

• Suitable for: Any drive application requiring 1/2 HP EVS
• Model: 1/2 HP DC Variable Speed Control System
• MPN: 1/2HPKIT2
• Brand: DC Drive
• Speed Range: 750 to 5415 No-Load RPM Measured Speed Range
• Motor Type: 1/2 HP DC Motor + Control + Pulleys + Belt + Mount

]]> https://maxonmotorspeedcontroller.com/2019/06/08/12-hp-variable-speed-dc-drive-kit-motor-control-pulleys-belt-750-5415-rpm-new/feed/ 0 https://maxonmotorspeedcontroller.com/2019/05/30/12-hp-variable-speed-dc-drive-kit-motor-control-pulleys-belt-395-10260-rpm-new/ https://maxonmotorspeedcontroller.com/2019/05/30/12-hp-variable-speed-dc-drive-kit-motor-control-pulleys-belt-395-10260-rpm-new/#comments Thu, 30 May 2019 19:39:42 +0000 http://maxonmotorspeedcontroller.com/2019/05/30/12-hp-variable-speed-dc-drive-kit-motor-control-pulleys-belt-395-10260-rpm-new/ […]]]>












This is a brand new 1/2 HP DC Motor with Solid State Variable Speed Control + (2) Step Pulleys + 3-Rib Belt + Mounting Plate + Hex Keys & Mounting Bolts/Nuts/Washers. Please choose between 24″, 30″, 36″, 42″ or 48 belt length… Here are the specs. When assembled with the (2) step pulleys and belt, this drive runs at 395 to 10,260 RPM depending on belt position. 1/2 HP DC brushed type motor. Motor speed range with NO pulleys/belt: 1425 to 2850 No-load RPM. Lowest speed range WITH pulleys/belt: 395 to 790 no-load RPM. Highest speed range WITH pulleys/belt: 5,130 to 10, 260 no-load RPM. Clockwise rotation (facing end of motor shaft). Motor can be mounted via (3) 6mm Screws on the motor face in a 2-1/2 (64mm) circle 120 degrees apart. Motor mounting plate has a 5/16″ hole and a 5/16″ x 1-1/4″ long slot that are 5-1/2″ apart. The motor shaft is 591″ (15mm) diameter x 1-3/8″ (35mm) long. The motor shaft is 2-7/16 (62mm) long overall. Motor body is 3-1/8″ (79mm) diameter x 7-1/2″ (191mm) long. DC Motor control (solid state). Input power: 120 Volts / 4.5 amps / 1 Ph / 60 Hz. The six steps on the pulley are 16mm, 34mm, 43mm, 50mm, 54mm, and 58mm diameter. The 3-rib belt is 5/16″ wide x 24″, 30″, 36″, 42″ or 48″ long… Control box measures 6″ wide x 4-3/4″ tall x 3 deep + projections for switches and cord grips. With safety switch, variable speed control knob, & built-in resettable circuit breaker. Heavy duty 6 ft grounded cord plus 3 ft cord between motor & control. With screws to mount control box. With (3) motor mounting socket head cap screws/washers. With 2 hex keys. Motor produces its best torque in the top half of its speed range. This is a complete motor / control package ready to be mounted to your lathe, drill, mill, or any other machine requiring a 1/2 HP variable speed drive. This system is brand new but will come in generic packaging. Thanks for stopping by. Failure to do so may cause injury. The item “1/2 HP Variable Speed DC Drive Kit Motor Control Pulleys Belt 395-10260 RPM New” is in sale since Thursday, March 2, 2017. This item is in the category “Business & Industrial\Automation, Motors & Drives\Drives & Starters\Drives & Motor Controls\Speed Controls”. The seller is “thirddevil” and is located in Jacksonville, Florida. This item can be shipped worldwide.

• Brand: DC Drive
• Model: 1/2 HP DC Variable Speed Control System
• MPN: 1/2HPKIT1
• Speed Range: 395 to 10,260 No-Load RPM Measured Speed Range
• Motor Type: 1/2 HP DC Motor + Control + Pulleys + Belt + Mount
• Suitable for: Any drive application requiring 1/2 HP EVS

]]> https://maxonmotorspeedcontroller.com/2019/05/30/12-hp-variable-speed-dc-drive-kit-motor-control-pulleys-belt-395-10260-rpm-new/feed/ 0