https://maxonmotorspeedcontroller.com Tue, 21 Apr 2026 17:32:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://maxonmotorspeedcontroller.com/2021/12/02/myford-super-7-lathe-1-hp-motor-with-telsa-cl-750-speed-controller-pre-wired/ https://maxonmotorspeedcontroller.com/2021/12/02/myford-super-7-lathe-1-hp-motor-with-telsa-cl-750-speed-controller-pre-wired/#comments Fri, 03 Dec 2021 02:06:00 +0000 https://maxonmotorspeedcontroller.com/2021/12/02/myford-super-7-lathe-1-hp-motor-with-telsa-cl-750-speed-controller-pre-wired/ […]]]>













MYFORD SUPER 7 LATHE 1 HP MOTOR WITH TELSA CL 750 SPEED CONTROLLER PRE WIRED. 3 PHASE MOTOR PLUGS STRAIGHT INTO CONTOLLER THEN DIRECT INTO STANDARD 240VOLT SOCKET. ALL PREWIRED READY TO FIT DIRECT ONTO LATHE. 4 SELT TAPPERS HOLD BOX TO BASE ALL WIRING THROUGH BASE. CAME OFF A VERY LITTLE USED LATHE. PLEASE NOTE I DO NOT SUPPLY PARTS OFF WORN OUT OR END OF LINE LATHES. SOME LATHES HAVE HARDLY SEEN ANY USE AT ALL. The item “MYFORD SUPER 7 LATHE 1 HP MOTOR WITH TELSA CL 750 SPEED CONTROLLER PRE WIRED” is in sale since Wednesday, December 1, 2021. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “doog12010″ and is located in BROMYARD, Herefordshire. This item can be shipped worldwide.

• Machine Type: Manual Lathe
• MPN: Does Not Apply
• Treated Material: Metal
• Brand: Myford
• Control: CHUCK

]]> https://maxonmotorspeedcontroller.com/2021/12/02/myford-super-7-lathe-1-hp-motor-with-telsa-cl-750-speed-controller-pre-wired/feed/ 0 https://maxonmotorspeedcontroller.com/2021/04/16/new-design-av400-lathe-speed-controller-and-12hp-motor-suits-myford-ml10/ https://maxonmotorspeedcontroller.com/2021/04/16/new-design-av400-lathe-speed-controller-and-12hp-motor-suits-myford-ml10/#comments Sat, 17 Apr 2021 00:34:11 +0000 http://maxonmotorspeedcontroller.com/2021/04/16/new-design-av400-lathe-speed-controller-and-12hp-motor-suits-myford-ml10/ […]]]>













Proven latest design, firmware updated October 2019 Designed and built by us for the Myford ML7. Now with even greater performance and motor torque than before, our new. Series of lathe speed controllers are the latest update to our proven CL series units. With the leading Mitsubishi Electric Digital auto-tuning, Flux Vector motor mapping and intelligent slip compensation, the lathe motor holds the set speed on the toughest machining tasks. Far less tedious belt changing, screw cutting made easy. Parting off with confidence, increase the speed as the diameter reduces. Inch forward and inch reverse function for aligning work held in four jaw chucks, faceplates and useful for tapping from the tailstock. Full variable speed control from 10% – 120% motor speed, lowest back gear speed 40RPM? After fitting our speed controller you can go down to 4RPM! 20% increase in speed in all back gear and direct belt speeds with constant motor torque. Available as 1/2hp or 1hp they are the perfect upgrade for Boxford, Myford, Drummond, South bend lathes as well as other machine tools such as Tom senior mills, Union Graduate wood turning lathes etc. Important, this listing is for a 0.37KW (1/2hp) AV400 lathe speed controller complete with motor, for our 0.75KW (1HP) version see our AV750 listing. Speed control packages available for larger lathes, message us. Complete ready wired, the new variable speed motor (5/8ths diameter shaft) will fit to your Myford ML7, Boxford and Southbend lathes without any difficulty. On the Mitsubishi inverter and 3 years on the motor. For reliability and peace of mind. The AV400 is designed and built by us here in the UK, using high grade push buttons and controls. Speed knob, 5 – 60HZ with’Inch’ mode. FWD / REV switch. Emergency stop, twist to release. Motor prewired with 1.5M cable and metal clad captive plug to inverter. Quality powder coated steel box. Quiet resiliently mounted motor for vibration free operation. Advanced Vector for high torque. Pre Wired ready to run. Full tech support before and after sales. Supplier of large power variable speed drives to industry since 1987. (inverters installed to date by us, total over 21,000,000KW). Inverter only, pushbuttons and electrical controls excluded, full conditions available on request. 3 To continually improve our products we reserve the right to change specification without notice. We are suppliers to industry of high power Variable frequency drives from 0.25KW to 1,000KW and industrial automation repairs. Mitsubishi inverters and 3ph motors from stock. Speed control systems to order for centrifuges, Ball mills, Cement mills, Overhead cranes, conveyors, food processing, plastic extruders, etc. Thanks for looking at our listing, if you have any questions please ask us, we are friendly! The item “New design! AV400 Lathe speed controller and 1/2hp motor suits Myford ML10″ is in sale since Monday, June 15, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “motor-speed-control” and is located in Warrington. This item can be shipped to United Kingdom.

• Country/Region of Manufacture: United Kingdom
• Machine Type: ML7
• Max Spindle Speed (RPM): 1500 – 2000
• Power Source: Inverter
• MPN: Does Not Apply
• Brand: NEWTON TESLA
• Control: Automatic

]]> https://maxonmotorspeedcontroller.com/2021/04/16/new-design-av400-lathe-speed-controller-and-12hp-motor-suits-myford-ml10/feed/ 0 https://maxonmotorspeedcontroller.com/2021/03/17/lathe-speed-controller-av750-and-1hp-motor-for-myford-super-7/ https://maxonmotorspeedcontroller.com/2021/03/17/lathe-speed-controller-av750-and-1hp-motor-for-myford-super-7/#comments Wed, 17 Mar 2021 22:06:06 +0000 http://maxonmotorspeedcontroller.com/2021/03/17/lathe-speed-controller-av750-and-1hp-motor-for-myford-super-7/ […]]]>













Brand new design, AV750 just released new firmware October 2020. Now with even greater performance and motor torque than before, our new. Series of lathe speed controllers are the latest update to our proven CL series units. With the leading Mitsubishi Electric Digital auto-tuning, Flux Vector motor mapping and intelligent slip compensation, the lathe motor holds the set speed on the toughest machining tasks. Far less tedious belt changing, screw cutting made easy. Parting off with confidence, increase the speed as the diameter reduces. Inch forward and inch reverse function for aligning work held in four jaw chucks, faceplates and useful for tapping from the tailstock. Full variable speed control from 10% – 120% motor speed, whats your lowest back gear speed, 40RPM? After fitting our speed controller you can go down to 4RPM! 20% increase in speed in all back gear and direct belt speeds with constant motor torque. Available as 1/2hp or 1hp they are the perfect upgrade for Boxford, Myford, Drummond, South bend lathes as well as other machine tools such as Tom senior mills, Union Graduate wood turning lathes etc. Important, this listing is for a 0.75KW (1hp) AV750 lathe speed controller complete with motor. For our 0.37KW (1/2HP) version see our AV400 listing. Speed control packages available for larger lathes, message us. Complete ready wired, the new variable speed motor (5/8ths diameter shaft) will fit to your Myford Super 7, Boxford and Southbend lathes without any difficulty. On the Mitsubishi inverter and 3 years on the motor. For reliability and peace of mind. The AV400 is designed and built by us here in the UK, using high grade push buttons and controls. Speed knob , 5 – 60HZ with low speed’Inch’ mode. FWD / REV switch. Emergency stop , twist to release. Motor prewired with 1.5M cable and metal clad captive plug to inverter. Quality powder coated steel box. Quiet resiliently mounted motor for vibration free operation. Full protection against overload, overtemperature, overvoltage. Mitsubishi Electric Inverter Technology. Advanced Vector for high torque. Pre Wired ready to run. Full tech support before and after sales. Supplier of large power variable speed drives to industry since 1987. (inverters installed to date by us, total over 21,000,000KW). Inverter only, pushbuttons and electrical controls excluded, full conditions available on request. 3 To continually improve our products we reserve the right to change specification without notice. We are suppliers to industry of high power Variable frequency drives from 0.25KW to 1,000KW and industrial automation repairs. Mitsubishi inverters and 3ph motors from stock. Telephone tech support available 08:00 – 23:00 7 days a week. (the last image shows an overhead crane at a steel stockholders fitted with our Mitsubishi inverters, 110KW, 75KW and 11KW). Thanks for looking at our listing, if you have any questions please ask us, we are friendly! The item “Lathe speed controller AV750 and 1HP motor for Myford Super 7″ is in sale since Sunday, November 1, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Other DIY Tools & Workshop Equipment”. The seller is “motor-speed-control” and is located in Warrington. This item can be shipped to United Kingdom.

• Brand: Newton Tesla

]]> https://maxonmotorspeedcontroller.com/2021/03/17/lathe-speed-controller-av750-and-1hp-motor-for-myford-super-7/feed/ 0 https://maxonmotorspeedcontroller.com/2020/12/17/new-design-lathe-speed-controller-av550-and-34hp-motor-for-myford-super-7/ https://maxonmotorspeedcontroller.com/2020/12/17/new-design-lathe-speed-controller-av550-and-34hp-motor-for-myford-super-7/#comments Thu, 17 Dec 2020 21:02:24 +0000 http://maxonmotorspeedcontroller.com/2020/12/17/new-design-lathe-speed-controller-av550-and-34hp-motor-for-myford-super-7/ […]]]>











Brand new design, AV550 just released latest firmware update November 2020. Now with even greater performance and motor torque than before, our new. Series of lathe speed controllers are the latest update to our proven CL series units. With the leading Mitsubishi Electric Digital auto-tuning, Flux Vector motor mapping and intelligent slip compensation, the lathe motor holds the set speed on the toughest machining tasks. Far less tedious belt changing, screw cutting made easy. Parting off with confidence, increase the speed as the diameter reduces. Inch forward and inch reverse function for aligning work held in four jaw chucks, faceplates and useful for tapping from the tailstock. Full variable speed control from 10% – 120% motor speed, whats your lowest back gear speed, 40RPM? After fitting our speed controller you can go down to 4RPM! 20% increase in speed in all back gear and direct belt speeds with constant motor torque. Available as 1/2hp or 1hp they are the perfect upgrade for Boxford, Myford, Drummond, South bend lathes as well as other machine tools such as Tom senior mills, Union Graduate wood turning lathes etc. Important, this listing is for a 0.55KW (3/4hp) AV550 lathe speed controller complete with motor. For our 0.37KW (1/2HP) and 0.75KW (1HP) versions see our AV400 and AV750 listings. Speed control packages available for larger lathes, message us. Complete ready wired, the new variable speed motor (5/8ths diameter shaft) will fit to your Myford Super 7, Boxford and Southbend lathes without any difficulty. On the Mitsubishi inverter and 3 years on the motor. For reliability and peace of mind. The AV400 is designed and built by us here in the UK, using high grade push buttons and controls. Speed knob , 5 – 60HZ with low speed’Inch’ mode. FWD / REV switch. Emergency stop , twist to release. Motor prewired with 1.5M cable and metal clad captive plug to inverter. Quality powder coated steel box. Quiet resiliently mounted motor for vibration free operation. Full protection against overload, overtemperature, overvoltage. Mitsubishi Electric Inverter Technology. Advanced Vector for high torque. Pre Wired ready to run. Full tech support before and after sales. Supplier of large power variable speed drives to industry since 1987. (inverters installed to date by us, total over 21,000,000KW). Inverter only, pushbuttons and electrical controls excluded, full conditions available on request. 3 To continually improve our products we reserve the right to change specification without notice. We are suppliers to industry of high power Variable frequency drives from 0.25KW to 1,000KW and industrial automation repairs. Mitsubishi inverters and 3ph motors from stock. Telephone tech support available 08:00 – 23:00 7 days a week. (the last image shows an overhead crane at a steel stockholders fitted with our Mitsubishi inverters, 110KW, 75KW and 11KW). Thanks for looking at our listing, if you have any questions please ask us, we are friendly! The item “New design! Lathe speed controller AV550 and 3/4HP motor for Myford Super 7″ is in sale since Wednesday, June 17, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “motor-speed-control” and is located in Warrington. This item can be shipped to United Kingdom.

• MPN: Does Not Apply
• Control: Manual
• Machine Type: Manual Lathe
• Phase: Single
• Power Source: Inverter
• Country/Region of Manufacture: United Kingdom
• Max Spindle Speed (RPM): 1500 – 2000
• Brand: Myford

]]> https://maxonmotorspeedcontroller.com/2020/12/17/new-design-lathe-speed-controller-av550-and-34hp-motor-for-myford-super-7/feed/ 0 https://maxonmotorspeedcontroller.com/2020/12/04/new-design-lathe-speed-controller-av750-and-1hp-motor-for-myford-super-7-2/ https://maxonmotorspeedcontroller.com/2020/12/04/new-design-lathe-speed-controller-av750-and-1hp-motor-for-myford-super-7-2/#comments Fri, 04 Dec 2020 09:53:56 +0000 http://maxonmotorspeedcontroller.com/2020/12/04/new-design-lathe-speed-controller-av750-and-1hp-motor-for-myford-super-7-2/ […]]]>













Brand new design, AV750 just released October 2020, latest firmware. Now with even greater performance and motor torque than before, our new. Series of lathe speed controllers are the latest update to our proven CL series units. With the leading Mitsubishi Electric Digital auto-tuning, Flux Vector motor mapping and intelligent slip compensation, the lathe motor holds the set speed on the toughest machining tasks. Far less tedious belt changing, screw cutting made easy. Parting off with confidence, increase the speed as the diameter reduces. Inch forward and inch reverse function for aligning work held in four jaw chucks, faceplates and useful for tapping from the tailstock. Full variable speed control from 10% – 120% motor speed, whats your lowest back gear speed, 40RPM? After fitting our speed controller you can go down to 4RPM! 20% increase in speed in all back gear and direct belt speeds with constant motor torque. Available as 1/2hp or 1hp they are the perfect upgrade for Boxford, Myford, Drummond, South bend lathes as well as other machine tools such as Tom senior mills, Union Graduate wood turning lathes etc. Important, this listing is for a 0.75KW (1hp) AV750 lathe speed controller complete with motor. For our 0.37KW (1/2HP) version see our AV400 listing. Speed control packages available for larger lathes, message us. Complete ready wired, the new variable speed motor (5/8ths diameter shaft) will fit to your Myford Super 7, Boxford and Southbend lathes without any difficulty. On the Mitsubishi inverter and 3 years on the motor. For reliability and peace of mind. The AV400 is designed and built by us here in the UK, using high grade push buttons and controls. Speed knob , 5 – 60HZ with low speed’Inch’ mode. FWD / REV switch. Emergency stop , twist to release. Motor prewired with 1.5M cable and metal clad captive plug to inverter. Quality powder coated steel box. Quiet resiliently mounted motor for vibration free operation. Full protection against overload, overtemperature, overvoltage. Mitsubishi Electric Inverter Technology. Advanced Vector for high torque. Pre Wired ready to run. Full tech support before and after sales. Supplier of large power variable speed drives to industry since 1987. (inverters installed to date by us, total over 21,000,000KW). Inverter only, pushbuttons and electrical controls excluded, full conditions available on request. 3 To continually improve our products we reserve the right to change specification without notice. We are suppliers to industry of high power Variable frequency drives from 0.25KW to 1,000KW and industrial automation repairs. Mitsubishi inverters and 3ph motors from stock. Telephone tech support available 08:00 – 23:00 7 days a week. (the last image shows an overhead crane at a steel stockholders fitted with our Mitsubishi inverters, 110KW, 75KW and 11KW). Thanks for looking at our listing, if you have any questions please ask us, we are friendly! The item “New design! Lathe speed controller AV750 and 1HP motor for Myford Super 7″ is in sale since Sunday, November 1, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “motor-speed-control” and is located in Warrington. This item can be shipped to United Kingdom.

• Country/Region of Manufacture: United Kingdom
• Machine Type: Manual Lathe
• Max Spindle Speed (RPM): 1500 – 2000
• Power Source: Inverter
• MPN: Does Not Apply
• Phase: Single
• Brand: Boxford, Denford, Myford
• Control: Manual

]]> https://maxonmotorspeedcontroller.com/2020/12/04/new-design-lathe-speed-controller-av750-and-1hp-motor-for-myford-super-7-2/feed/ 0 https://maxonmotorspeedcontroller.com/2020/11/12/vfd-inverter-drive-u0026-new-3-phase-motor-for-my-myford-ml7-lathe/ https://maxonmotorspeedcontroller.com/2020/11/12/vfd-inverter-drive-u0026-new-3-phase-motor-for-my-myford-ml7-lathe/#comments Thu, 12 Nov 2020 05:56:36 +0000 http://maxonmotorspeedcontroller.com/2020/11/12/vfd-inverter-drive-u0026-new-3-phase-motor-for-my-myford-ml7-lathe/ ]]> https://maxonmotorspeedcontroller.com/2020/11/12/vfd-inverter-drive-u0026-new-3-phase-motor-for-my-myford-ml7-lathe/feed/ 0 https://maxonmotorspeedcontroller.com/2020/10/01/new-design-av400-lathe-speed-controller-and-12hp-motor-suits-myford-ml7/ https://maxonmotorspeedcontroller.com/2020/10/01/new-design-av400-lathe-speed-controller-and-12hp-motor-suits-myford-ml7/#comments Thu, 01 Oct 2020 07:27:13 +0000 http://maxonmotorspeedcontroller.com/2020/10/01/new-design-av400-lathe-speed-controller-and-12hp-motor-suits-myford-ml7/ […]]]>











Brand new design, just released June 2019. Now with even greater performance and motor torque than before, our new. Series of lathe speed controllers are the latest update to our proven CL series units. With the leading Mitsubishi Electric Digital auto-tuning, Flux Vector motor mapping and intelligent slip compensation, the lathe motor holds the set speed on the toughest machining tasks. Far less tedious belt changing, screw cutting made easy. Parting off with confidence, increase the speed as the diameter reduces. Inch forward and inch reverse function for aligning work held in four jaw chucks, faceplates and useful for tapping from the tailstock. Full variable speed control from 10% – 120% motor speed, lowest back gear speed 40RPM? After fitting our speed controller you can go down to 4RPM! 20% increase in speed in all back gear and direct belt speeds with constant motor torque. Available as 1/2hp or 1hp they are the perfect upgrade for Boxford, Myford, Drummond, South bend lathes as well as other machine tools such as Tom senior mills, Union Graduate wood turning lathes etc. Important, this listing is for a 0.37KW (1/2hp) AV400 lathe speed controller complete with motor, for our 0.75KW (1HP) version see our AV750 listing. Speed control packages available for larger lathes, message us. Complete ready wired, the new variable speed motor (5/8ths diameter shaft) will fit to your Myford ML7, Boxford and Southbend lathes without any difficulty. On the Mitsubishi inverter and 3 years on the motor. For reliability and peace of mind. The AV400 is designed and built by us here in the UK, using high grade push buttons and controls. Speed knob, 5 – 60HZ with’Inch’ mode. FWD / REV switch. Emergency stop, twist to release. Motor prewired with 1.5M cable and metal clad captive plug to inverter. Quality powder coated steel box. Quiet resiliently mounted motor for vibration free operation. Advanced Vector for high torque. Pre Wired ready to run. Full tech support before and after sales. Supplier of large power variable speed drives to industry since 1987. (inverters installed to date by us, total over 21,000,000KW). Inverter only, pushbuttons and electrical controls excluded, full conditions available on request. 3 To continually improve our products we reserve the right to change specification without notice. We are suppliers to industry of high power Variable frequency drives from 0.25KW to 1,000KW and industrial automation repairs. Mitsubishi inverters and 3ph motors from stock. Speed control systems to order for centrifuges, Ball mills, Cement mills, Overhead cranes, conveyors, food processing, plastic extruders, etc. Thanks for looking at our listing, if you have any questions please ask us, we are friendly! The item “New design! AV400 Lathe speed controller and 1/2hp motor suits Myford ML7″ is in sale since Monday, June 15, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “motor-speed-control” and is located in Warrington. This item can be shipped to United Kingdom.

• Country/Region of Manufacture: United Kingdom
• Machine Type: ML7
• Max Spindle Speed (RPM): 1500 – 2000
• Power Source: Inverter
• MPN: Does Not Apply
• Brand: NEWTON TESLA
• Control: Manual

]]> https://maxonmotorspeedcontroller.com/2020/10/01/new-design-av400-lathe-speed-controller-and-12hp-motor-suits-myford-ml7/feed/ 0 https://maxonmotorspeedcontroller.com/2020/09/18/lathe-speed-controller-av550-with-550w-58th-motor-shaft-for-myford-super7/ https://maxonmotorspeedcontroller.com/2020/09/18/lathe-speed-controller-av550-with-550w-58th-motor-shaft-for-myford-super7/#comments Fri, 18 Sep 2020 16:54:54 +0000 http://maxonmotorspeedcontroller.com/2020/09/18/lathe-speed-controller-av550-with-550w-58th-motor-shaft-for-myford-super7/ […]]]>












Brand new design, AV550 latest 2020 version. Now with even greater performance and motor torque than before, our new. Series of lathe speed controllers are the latest update to our proven CL series units. With the leading Mitsubishi Electric Digital auto-tuning, Flux Vector motor mapping and intelligent slip compensation, the lathe motor holds the set speed on the toughest machining tasks. Far less tedious belt changing, screw cutting made easy. Parting off with confidence, increase the speed as the diameter reduces. Inch forward and inch reverse function for aligning work held in four jaw chucks, faceplates and useful for tapping from the tailstock. Full variable speed control from 10% – 120% motor speed, whats your lowest back gear speed, 40RPM? After fitting our speed controller you can go down to 4RPM with full motor torque! 20% increase in speed in all back gear and direct belt speeds with constant motor torque. Available as 1/2hp or 1hp they are the perfect upgrade for Boxford, Myford, Drummond, South bend lathes as well as other machine tools such as Tom senior mills, Union Graduate wood turning lathes etc. Important, this listing is for a 0.55KW (3/4hp) AV550 lathe speed controller complete with 550W Resilient mounted motor. For our 0.37KW (1/2HP) version see our AV400 listing, or for 1.0hp see our listings for AV750. Speed control packages available for larger lathes, message us. Complete ready wired, the new variable speed motor (5/8ths diameter shaft) will fit to your Myford Super 7 lathe without any difficulty. On the Mitsubishi inverter and 3 years on the motor. For reliability and peace of mind. The AV750 is designed and built by us here in the UK, using high grade push buttons and controls. Speed knob , 5 – 60HZ with low speed’Inch’ mode. FWD / REV switch. Emergency stop , twist to release. Motor prewired with 1.5M cable and metal clad captive plug to inverter. Quality powder coated steel box. Quiet resiliently mounted motor for vibration free operation. Full protection against overload, overtemperature, overvoltage. Mitsubishi Electric Inverter Technology. Advanced Vector for high torque. Pre Wired ready to run. Full tech support before and after sales. Supplier of large power variable speed drives to industry since 1987. (inverters installed to date by us, total over 21,000,000KW). Inverter only, pushbuttons and electrical controls excluded, full conditions available on request. 3 To continually improve our products we reserve the right to change specification without notice. We are suppliers to industry of high power Variable frequency drives from 0.25KW to 1,000KW and industrial automation repairs. Mitsubishi inverters and 3ph motors from stock. Telephone tech support available 07:00 – 23:00 7 days a week. (the last image shows an overhead crane at a steel stockholders fitted with our Mitsubishi inverters, 110KW, 75KW and 11KW). Thanks for looking at our listing, if you have any questions please ask us, we are friendly! The item “Lathe speed controller AV550 with 550W 5/8th motor shaft, for Myford Super7″ is in sale since Wednesday, June 17, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “motor-speed-control” and is located in Warrington. This item can be shipped to United Kingdom.

• Country/Region of Manufacture: United Kingdom
• Machine Type: Super 7
• Max Spindle Speed (RPM): 1500 – 2000
• Power Source: Inverter
• MPN: Does Not Apply
• Swing Over Bed: 3.5
• Phase: Single
• Brand: Myford
• Control: Manual

]]> https://maxonmotorspeedcontroller.com/2020/09/18/lathe-speed-controller-av550-with-550w-58th-motor-shaft-for-myford-super7/feed/ 0 https://maxonmotorspeedcontroller.com/2020/08/20/lathe-speed-controller-av550-with-34hp-motor-for-myford-super-7/ https://maxonmotorspeedcontroller.com/2020/08/20/lathe-speed-controller-av550-with-34hp-motor-for-myford-super-7/#comments Thu, 20 Aug 2020 15:05:33 +0000 http://maxonmotorspeedcontroller.com/2020/08/20/lathe-speed-controller-av550-with-34hp-motor-for-myford-super-7/ […]]]>











Brand new design, AV550 just released June 2020. Now with even greater performance and motor torque than before, our new. Series of lathe speed controllers are the latest update to our proven CL series units. With the leading Mitsubishi Electric Digital auto-tuning, Flux Vector motor mapping and intelligent slip compensation, the lathe motor holds the set speed on the toughest machining tasks. Far less tedious belt changing, screw cutting made easy. Parting off with confidence, increase the speed as the diameter reduces. Inch forward and inch reverse function for aligning work held in four jaw chucks, faceplates and useful for tapping from the tailstock. Full variable speed control from 10% – 120% motor speed, whats your lowest back gear speed, 40RPM? After fitting our speed controller you can go down to 4RPM! 20% increase in speed in all back gear and direct belt speeds with constant motor torque. Available as 1/2hp or 1hp they are the perfect upgrade for Boxford, Myford, Drummond, South bend lathes as well as other machine tools such as Tom senior mills, Union Graduate wood turning lathes etc. Important, this listing is for a 0.55KW (3/4hp) AV550 lathe speed controller complete with motor. For our 0.37KW (1/2HP) and 0.75KW (1HP) versions see our AV400 and AV750 listings. Speed control packages available for larger lathes, message us. Complete ready wired, the new variable speed motor (5/8ths diameter shaft) will fit to your Myford Super 7, Boxford and Southbend lathes without any difficulty. On the Mitsubishi inverter and 3 years on the motor. For reliability and peace of mind. The AV400 is designed and built by us here in the UK, using high grade push buttons and controls. Speed knob , 5 – 60HZ with low speed’Inch’ mode. FWD / REV switch. Emergency stop , twist to release. Motor prewired with 1.5M cable and metal clad captive plug to inverter. Quality powder coated steel box. Quiet resiliently mounted motor for vibration free operation. Full protection against overload, overtemperature, overvoltage. Mitsubishi Electric Inverter Technology. Advanced Vector for high torque. Pre Wired ready to run. Full tech support before and after sales. Supplier of large power variable speed drives to industry since 1987. (inverters installed to date by us, total over 21,000,000KW). Inverter only, pushbuttons and electrical controls excluded, full conditions available on request. 3 To continually improve our products we reserve the right to change specification without notice. We are suppliers to industry of high power Variable frequency drives from 0.25KW to 1,000KW and industrial automation repairs. Mitsubishi inverters and 3ph motors from stock. Telephone tech support available 08:00 – 23:00 7 days a week. (the last image shows an overhead crane at a steel stockholders fitted with our Mitsubishi inverters, 110KW, 75KW and 11KW). Thanks for looking at our listing, if you have any questions please ask us, we are friendly! The item “Lathe speed controller AV550 with 3/4HP motor for Myford Super 7″ is in sale since Wednesday, June 17, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “motor-speed-control” and is located in Warrington. This item can be shipped to United Kingdom.

• Country/Region of Manufacture: United Kingdom
• Machine Type: Manual Lathe
• Max Spindle Speed (RPM): 1500 – 2000
• Power Source: Inverter
• MPN: Does Not Apply
• Phase: Single
• Brand: Boxford, Denford, Myford
• Control: Manual

]]> https://maxonmotorspeedcontroller.com/2020/08/20/lathe-speed-controller-av550-with-34hp-motor-for-myford-super-7/feed/ 0 https://maxonmotorspeedcontroller.com/2020/08/17/newton-tesla-cl400-variable-speed-controller-12hp-3ph-motor-fits-myford-lathe/ https://maxonmotorspeedcontroller.com/2020/08/17/newton-tesla-cl400-variable-speed-controller-12hp-3ph-motor-fits-myford-lathe/#comments Mon, 17 Aug 2020 19:44:27 +0000 http://maxonmotorspeedcontroller.com/2020/08/17/newton-tesla-cl400-variable-speed-controller-12hp-3ph-motor-fits-myford-lathe/ […]]]>









Newton Tesla CL400 variable speed controller. Speed is set by rotary control, with forward and reverse selected via switch on panel. With 0.37kW / 0.5HP 1425 RPM 3 phase motor manufactured by BFM of Shefield. Spindle size for the motor is shown in one of the photos – looks like it has a 16mm shaft. The item “Newton Tesla CL400 variable speed controller, 1/2HP 3Ph motor. Fits Myford lathe” is in sale since Friday, August 7, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “suffolksteam” and is located in Ipswich. This item can be shipped to United Kingdom.

]]> https://maxonmotorspeedcontroller.com/2020/08/17/newton-tesla-cl400-variable-speed-controller-12hp-3ph-motor-fits-myford-lathe/feed/ 0