https://maxonmotorspeedcontroller.com Sun, 14 Jun 2026 07:40:44 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://maxonmotorspeedcontroller.com/2021/12/03/cnc-spindle-motor-400w-er11-mach3-pwm-speed-controller-mount-engraving-kit/ https://maxonmotorspeedcontroller.com/2021/12/03/cnc-spindle-motor-400w-er11-mach3-pwm-speed-controller-mount-engraving-kit/#comments Fri, 03 Dec 2021 14:09:44 +0000 https://maxonmotorspeedcontroller.com/2021/12/03/cnc-spindle-motor-400w-er11-mach3-pwm-speed-controller-mount-engraving-kit/ 2 megohms. Chuck Part Length: Arbor parts 35mm, (including nuts and sandwich 43mm). Part chuck diameter: 16mm. Motor length: 185mm (including gripping […]]]>









Note:This motor Chuck size is 3.175mm. Insulation resistance:> 2 megohms. Chuck Part Length: Arbor parts 35mm, (including nuts and sandwich 43mm). Part chuck diameter: 16mm. Motor length: 185mm (including gripping parts and motor). Spindle Net Weight: 0.9KG. Spindle runout of about 0.01-0.04. Can be used for engraving metal or nonmetal materials. This comes with air-cooled spindle can work long hours. Suitable for carving PCB, acrylic, drilling. 1 x 400W Air cooled Spindle motor. Other Accessary as your Choice. The item “CNC Spindle Motor 400W ER11 & Mach3 PWM speed controller + Mount Engraving Kit” is in sale since Wednesday, June 3, 2020. This item is in the category “Business & Industrial\Industrial Automation & Motion Controls\Electric Motors\General Purpose Motors”. The seller is “dst2015″ and is located in shenzhen. This item can be shipped worldwide.

• Brand: Unbranded/Generic
• MPN: Does not apply
• Country/Region of Manufacture: China
• Model: 400W

]]> https://maxonmotorspeedcontroller.com/2021/12/03/cnc-spindle-motor-400w-er11-mach3-pwm-speed-controller-mount-engraving-kit/feed/ 0 https://maxonmotorspeedcontroller.com/2021/07/29/400w-brushless-spindle-motor-600w-psu-speed-driver-controller-for-cnc-engraving/ https://maxonmotorspeedcontroller.com/2021/07/29/400w-brushless-spindle-motor-600w-psu-speed-driver-controller-for-cnc-engraving/#comments Thu, 29 Jul 2021 08:06:13 +0000 http://maxonmotorspeedcontroller.com/2021/07/29/400w-brushless-spindle-motor-600w-psu-speed-driver-controller-for-cnc-engraving/ […]]]>













Sign up to Newsletters. Brushless 0.4KW Milling spindle Milling spindle Motor & switching power supply & speed controller. OUTSTANDING PERFORMANCE – The spindle motor kit is of low noise, low interference, and long service life. Its motor is brushless and will not generate brush spark when the motor runs, thus significantly reducing the electric spark disturbance of remote radio equipment. PREMIUM SPINDLE MOTOR – The premium spindle motor with air cooling fan and ER11 collet ensures smooth running. Work voltage: 48VDC; Rotation speed: 12000r/min; Power: 400W (Peak Power 500W); Torque: 530 mN. M; Insulation resistance: > 2Megohm. ADJUSTABLE SPEED POWER SUPPLY – The speed drive controller adopts a removable panel and speed/current alike closed-loop technology with multiple protection for outstanding performance and robust security. Besides, three types of speed regulation are designed to satisfy your different working conditions. DURABLE SPINDLE CLAMP – The clamp of the brushless spindle motor is constructed of high-quality cast aluminum for sturdiness and durability. And the surface is well finished to provide a better smoothness. It is high-efficiency for you to fasten the spindle. EXTENSIVE APPLICATION – The brushless spindle motor kit is a DIY engraving machine accessories. The tool is also widely applicable to small appliances, electric tools, water pumps, fan control system, lathes, mills, car hoists, pumps, conveyors, etc. Constructed with high quality material. Long time to utilize. Low noise and vibration. Brushless milling motor 0.4KW DC milling spindle (Extremel long working life). Power: 400W(Peak Power 500W). Power supply Specification: 600W. Axis collet Length: 43mm. Diameter of Axis collect holder:16mm. Repeat accuracy: 0.01-0.03mm. ER11 collect: 3.175mm. Package Dimensions(LWH): 251510cm (10”6”4”). Gross weight: 5kg (11lbs). Work Voltage: 48V DC. Rotation Speed: 12000 r / min. Power: 400W (Peak Power: 500W). Insulation Resistance: >2 Megohm. Power Supply Specification: 600W. Diameter: 57 mm (2.24”). Axis Collet Length: 43 mm (1.69”). Diameter of Axis Collect Holder: 16 mm (0.63”). Repeat Accuracy: 0.01 – 0.03 mm. ER11 Collect: 3.175 mm (0.125”). Package Dimensions (L x W x H): 25 x 15 x 10 cm (10” x 6” x 4”). Gross Weight: 5 kg (11 lbs). 1 x Brushless Milling Motor 0.4KW DC Milling Spindle. 1 x Brushless DC Speed Controller Output Stage. 1 x 48V 10A Switching Power Supply 600W Specification. 1 x Mounting Bracket and Screws. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. International Buyers Please Note. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within 12-24hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “400W Brushless Spindle Motor +600W PSU Speed Driver Controller For CNC Engraving” is in sale since Sunday, December 2, 2018. This item is in the category “Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Electric Motor Parts & Accessories”. The seller is “hotitemsale” and is located in Leicester. This item can be shipped to all countries in Europe.

• Unit Quantity: 1
• Unit Type: Set
• Type: Milling Spindle Motor
• Brand: VEVOR
• MPN: UNBSU00814
• Protection Against Solids: Tools and Thick Wire
• Protection Against Liquids: Does Not Apply
• Custom Bundle: No
• Modified Item: No
• Work voltage: 48VDC
• Rotation speed: 12000r/min
• Power: 400W(Peak Power 500W)
• Torque: 530mN.m
• Insulation resistance: >2Megohm
• Dielectric strength: 400V
• Diameter: 57mm
• Axis collet Length: 43mm
• Diameter of Axis collect holder: 16mm
• Repeat accuracy: 0.01-0.03mm
• ER11 collect: 3.175mm
• Power supply Specification: 600W

]]> https://maxonmotorspeedcontroller.com/2021/07/29/400w-brushless-spindle-motor-600w-psu-speed-driver-controller-for-cnc-engraving/feed/ 0 https://maxonmotorspeedcontroller.com/2021/02/12/er11-400w-brushless-spindle-motor-600w-speed-driver-controller-for-cnc-engraving/ https://maxonmotorspeedcontroller.com/2021/02/12/er11-400w-brushless-spindle-motor-600w-speed-driver-controller-for-cnc-engraving/#comments Fri, 12 Feb 2021 07:59:31 +0000 http://maxonmotorspeedcontroller.com/2021/02/12/er11-400w-brushless-spindle-motor-600w-speed-driver-controller-for-cnc-engraving/ […]]]>













Sign up to Newsletters. Brushless 0.4KW Milling spindle Milling spindle Motor & switching power supply & speed controller. 1, Potentiometer speed regulation: You can control speed directly through potentiometer. 2, Analog controlVR connect to voltage signal input. GND connect to ground (voltage range of 0-5V) Notice. When you use external PWM signal speed control, you must be remove the potentiometer control. Otherwise, it will not working. PWM signal control you can input an external PWM signal to speed control. It requires external PWM: level 3.5-12V VPP, frequency 1K-10KHZ, which suitable for MACH3 spindle speed control. (Notice: external PWM signal control necessary to remove the potentiometer , or it can not control). Motor Run/StopENBL: EN terminal is applied to control motor Run / Stop. Motor is running When EN is floating. Motor stop running when EN connect to GND terminal. Motor forward / reverse control (F / R) F/R terminal is applied to control motor rotate direction. Motor run clockwise when F/R is connecting +5V, otherwise motor will reverse. Brushless DC Speed Controller Power Amplifier. Drive current: Rated current 10A, Peak current 15A. The drive power: 500w (up to working voltage). Speed/Current alike close loop technology, smooth rotation. Pure hardware design, high-speed, high noise immunity. Speed regulation: external potentiometer adjust, 0-5V analog voltage , PWM speed control (MACH3 control). F/R(forward / reverse control) Rotation, soft shift function. Over current, short circuit protection (red LED indicator). EN(enable control) functio. Constructed with high quality material. Long time to utilize. Low noise and vibration. Brushless milling motor 0.4KW DC milling spindle (Extremel long working life). Power: 400W(Peak Power 500W). Power supply Specification: 600W. Axis collet Length: 43mm. Diameter of Axis collect holder:16mm. Repeat accuracy: 0.01-0.03mm. ER11 collect: 3.175mm. Package Dimensions(LWH): 251510cm (10”6”4”). Gross weight: 5kg (11lbs). 1 x Brushless milling motor 0.4KW DC milling spindle. 1 x Brushless DC speed controller output stage. 1 x 48V 10A Switching power supply 600W Specification. 1 x Mounting bracket and screws. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. International Buyers Please Note. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within 12-24hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “ER11 400W Brushless Spindle Motor 600W Speed Driver Controller for CNC Engraving” is in sale since Thursday, October 4, 2018. This item is in the category “Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Electric Motor Parts & Accessories”. The seller is “industry-village” and is located in Jenec. This item can be shipped to all countries in Europe.

• Unit Quantity: 1
• Unit Type: Set
• Type: Milling Spindle Motor
• Brand: VEVOR
• MPN: LPWFR0056
• Protection Against Solids: Tools and Thick Wire
• Protection Against Liquids: Does Not Apply
• Custom Bundle: No
• Modified Item: No
• Work voltage: 48VDC
• Rotation speed: 12000r/min
• Power: 400W(Peak Power 500W)
• Torque: 530mN.m
• Insulation resistance: >2Megohm
• Dielectric strength: 400V
• Diameter: 57mm
• Axis collet Length: 43mm
• Diameter of Axis collect holder: 16mm
• Repeat accuracy: 0.01-0.03mm
• ER11 collect: 3.175mm
• Power supply Specification: 600W

]]> https://maxonmotorspeedcontroller.com/2021/02/12/er11-400w-brushless-spindle-motor-600w-speed-driver-controller-for-cnc-engraving/feed/ 0 https://maxonmotorspeedcontroller.com/2020/09/22/er11-brushless-spindle-motor-400w-cnc-engraving-driver-600w-speed-controller/ https://maxonmotorspeedcontroller.com/2020/09/22/er11-brushless-spindle-motor-400w-cnc-engraving-driver-600w-speed-controller/#comments Tue, 22 Sep 2020 07:45:27 +0000 http://maxonmotorspeedcontroller.com/2020/09/22/er11-brushless-spindle-motor-400w-cnc-engraving-driver-600w-speed-controller/ […]]]>













Sign up to Newsletters. Brushless 0.4KW Milling spindle Milling spindle Motor & switching power supply & speed controller. 1, Potentiometer speed regulation: You can control speed directly through potentiometer. 2, Analog controlVR connect to voltage signal input. GND connect to ground (voltage range of 0-5V) Notice. When you use external PWM signal speed control, you must be remove the potentiometer control. Otherwise, it will not working. PWM signal control you can input an external PWM signal to speed control. It requires external PWM: level 3.5-12V VPP, frequency 1K-10KHZ, which suitable for MACH3 spindle speed control. (Notice: external PWM signal control necessary to remove the potentiometer , or it can not control). Motor Run/StopENBL: EN terminal is applied to control motor Run / Stop. Motor is running When EN is floating. Motor stop running when EN connect to GND terminal. Motor forward / reverse control (F / R) F/R terminal is applied to control motor rotate direction. Motor run clockwise when F/R is connecting +5V, otherwise motor will reverse. Brushless DC Speed Controller Power Amplifier. Drive current: Rated current 10A, Peak current 15A. The drive power: 500w (up to working voltage). Speed/Current alike close loop technology, smooth rotation. Pure hardware design, high-speed, high noise immunity. Speed regulation: external potentiometer adjust, 0-5V analog voltage , PWM speed control (MACH3 control). F/R(forward / reverse control) Rotation, soft shift function. Over current, short circuit protection (red LED indicator). EN(enable control) functio. Constructed with high quality material. Long time to utilize. Low noise and vibration. Brushless milling motor 0.4KW DC milling spindle (Extremel long working life). Power: 400W(Peak Power 500W). Power supply Specification: 600W. Axis collet Length: 43mm. Diameter of Axis collect holder:16mm. Repeat accuracy: 0.01-0.03mm. ER11 collect: 3.175mm. Package Dimensions(LWH): 251510cm (10”6”4”). Gross weight: 5kg (11lbs). 1 x Brushless milling motor 0.4KW DC milling spindle. 1 x Brushless DC speed controller output stage. 1 x 48V 10A Switching power supply 600W Specification. 1 x Mounting bracket and screws. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. International Buyers Please Note. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within 12-24hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “ER11 Brushless Spindle Motor 400W CNC Engraving Driver + 600W Speed Controller” is in sale since Saturday, November 24, 2018. This item is in the category “Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Electric Motor Parts & Accessories”. The seller is “tool-zoom” and is located in Jenec. This item can be shipped to all countries in Europe.

• Brand: VEVOR
• MPN: XUNBS0093
• Work voltage: 48VDC
• Rotation speed: 12000r/min
• Power: 400W(Peak Power 500W)
• Torque: 530mN.m
• Insulation resistance: >2Megohm
• Dielectric strength: 400V
• Diameter: 57mm
• Axis collet Length: 43mm
• Diameter of Axis collect holder: 16mm
• Repeat accuracy: 0.01-0.03mm
• ER11 collect: 3.175mm
• Power supply Specification: 600W
• EAN: 0800000462712

]]> https://maxonmotorspeedcontroller.com/2020/09/22/er11-brushless-spindle-motor-400w-cnc-engraving-driver-600w-speed-controller/feed/ 0 https://maxonmotorspeedcontroller.com/2020/01/19/cnc-400w-brushless-spindle-motor-er11-driver-speed-controller-mount-engraving/ https://maxonmotorspeedcontroller.com/2020/01/19/cnc-400w-brushless-spindle-motor-er11-driver-speed-controller-mount-engraving/#comments Sun, 19 Jan 2020 06:14:25 +0000 http://maxonmotorspeedcontroller.com/2020/01/19/cnc-400w-brushless-spindle-motor-er11-driver-speed-controller-mount-engraving/ […]]]>







Rushless Spindle DC Motor. Long life working time. Power: 400W(peak power 500W). Axis collet Length: 43mm. Diameter of Axis collect holder:16mm. Repeat accuracy: 0.01-0.03mm. ER11 collect: 3.175mm. Net weight:1.1KG. Brushless DC speed driver controller. Drive current: Rated current 10A, Peak current 15A. 500w (up to working voltage). Speed/Current alike close loop technology, smooth rotation. Pure hardware design, high-speed, high noise immunity. Speed regulation: external potentiometer adjust, 0-5V analog voltage , PWM speed control (MACH3 control). F/R(forward / reverse control) Rotation, soft shift function. Over current, short circuit protection (red LED indicator). EN(enable control) function. DC voltage input DC12-52V. Hall positive power supply. +5 V power supply control signal. Speed control signal input terminal. Common control signal power ground. Forward / reverse control signal terminal. 1, Potentiometer speed regulation: You can control speed directly through potentiometer. VR connect to voltage signal input. GND connect to ground (voltage range of 0-5V) Notice. When you use external PWM signal speed control, you must be remove the potentiometer control. Otherwise, it will not working. You can input an external PWM signal to speed control. It requires external PWM: level 3.5-12V VPP, frequency 1K-10KHZ, which suitable for MACH3 spindle speed control. (Notice: external PWM signal control necessary to remove the potentiometer , or it can not control). EN terminal is applied to control motor Run / Stop. Motor is running When EN is floating. Motor stop running when EN connect to GND terminal. Motor forward / reverse control (F / R). F/R terminal is applied to control motor rotate direction. Motor run clockwise when F/R is connecting +5V, otherwise motor will reverse. 1 400W spindle motor with. With ER11 3.175 collet. 1 Mach3 PWM speed controller. Mount bracket with screws. The images shown are not the actual item and are for your reference only. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. There are NO EXCEPTIONS! OR, you may choose to have a replacement. In Appreciation of Your Feedback. The item “CNC 400W Brushless Spindle Motor ER11 &driver speed controller & Mount engraving” is in sale since Monday, July 31, 2017. This item is in the category “Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Other Motor Controls”. The seller is “diyelecmall108″ and is located in ShenZhen ,Guangdong. This item can be shipped worldwide.

• Brand: Unbranded/Generic
• MPN: Does not apply
• UPC: Does not apply
• EAN: Does not apply

]]> https://maxonmotorspeedcontroller.com/2020/01/19/cnc-400w-brushless-spindle-motor-er11-driver-speed-controller-mount-engraving/feed/ 0 https://maxonmotorspeedcontroller.com/2019/10/30/400w-brushless-spindle-motor-600w-pwm-speed-driver-controller-for-cnc-engraving/ https://maxonmotorspeedcontroller.com/2019/10/30/400w-brushless-spindle-motor-600w-pwm-speed-driver-controller-for-cnc-engraving/#comments Wed, 30 Oct 2019 05:10:22 +0000 http://maxonmotorspeedcontroller.com/2019/10/30/400w-brushless-spindle-motor-600w-pwm-speed-driver-controller-for-cnc-engraving/ […]]]>







A:link {color: #C81269; text-decoration:underline;} A:visited {color: #666666; text-decoration:underline;} A:hover {color: #333333; text-decoration:underline;} A:active {color: #C81269; text-decoration:underline;}. Content {font-family: Verdana, Arial, helvetica, sans-serif; font-size: 11px; font-style: normal; font-weight: normal; color: #000000; line-height: 18px; text-decoration:none; text-align: justify;}. Submenu{font-family: Verdana, Arial, helvetica, sans-serif; font-size: 11px; font-style: normal; font-weight: bold; color: #666666; line-height: 15px; left: 20px; margin-left: 20px; text-decoration:none;}. Content_white {font-family: Verdana, Arial, helvetica, sans-serif; font-size: 11px; font-style: normal; font-weight: normal; color: #FFFFFF; line-height: 16px; text-decoration:none; text-align: justify;}. Best_seller {font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 12px; font-style: normal; font-weight: normal; color: #000000; text-decoration:none; text-align: left; padding: 0px;}. Best_seller_even {font-family: Verdana, Arial, helvetica, sans-serif; font-size: 12px; font-style: normal; font-weight: normal; color: #000000; line-height: 14px; text-decoration:none; text-align: left; padding-top: 10px; padding-right: 0px; padding-bottom: 0px; padding-left: 0px; background-color: #EBEBEB;}. Small {font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 9px; font-style: normal; font-weight: normal; color: #000000; line-height: 18px; text-decoration:none; text-align: justify;}. NVBDH+ ER8 400W Brushless Spindle Motor +600W Motor Driver 12000RPM For CNC Engraving Machine with. NVBDH+ With Hall 600W Brushless DC motor Driver. Motor: 1 Power: 400W 2 Input Voltage: 48V 3 Rotating speed: 12000 R/Min 4 Torque: 0.45 N. M 5 Insulation resistance: > 2ohms 6 Dielectric strength: 400V 7 Diameter: 55mm 8 Chuck portion length: Arbor parts 35mm, (including the nut and sandwich 43mm) 9 Part chuck diameter: 16mm 10 Total motor length: 172mm (comprising gripping parts and motor) 11 Spindle Weight: 1.1KG 12 Spindle runout: about 0.01-0.03. 13 Mount: Product outline dimension is 1187633mm, as picture 1-7 shows. The two installing holes size is 110mm. NVBDH+ Driver: 1 High performance, low prices 2 DSP main control module 3 No current passing when no movement 4 Voltage range 24VDC-60VDC 5 Demountable panel 6 Maximum driver power 600W 7 3 debugging ways: Panel potentiometer, external voltage signal, external PWM Signal 8 Maximum driver motor running speed 12000R/Min. 9 Speed testing port for user to inspect the real speed. 10 Internal over-voltage, over-current and stalling inspection 11 Input signal TTL compatible. NVBDH+ connection Thought parameter setting, the speed control mode can be adjusted by external analog external PWM and panel potentiometer. Start/Stop also can be controlled by external interface or panel keys, the use can define the combination control methods. Here we explain 3 ways connection mode:Panel button speed control+Panel start/stop controlexternal analog speed control+external interface start/stop controlexternal PWM speed control+external interface start/stop control. Cable thick yellowthick green and thick blue is the U\V\W phase of the motor, they connect with UVW port on the drivers respectively. Cable thin redthin blackthin greenthin blue on the motor is Hall power supply+Hall GNDHall UHall VHall W respectively, connect with H+H-HV HW on the drivers respectively. 1 x 600W Motor Driver 1 x 400W Spindle brushless motor with ER8 clamp. 1 X Fixed clamp seat. Unused/unopened merchandise will be fully credited. All emails will be answered within 24 hours. The item “400W Brushless Spindle Motor +600W PWM speed Driver controller For CNC Engraving” is in sale since Saturday, September 5, 2015. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Woodworking Supplies\Other Woodworking Supplies”. The seller is “szsunwin” and is located in Shenzhen,Guangdong. This item can be shipped worldwide.

• Country/Region of Manufacture: China
• MPN: SW2019070628
• Brand: kongzhiqi

]]> https://maxonmotorspeedcontroller.com/2019/10/30/400w-brushless-spindle-motor-600w-pwm-speed-driver-controller-for-cnc-engraving/feed/ 0