https://maxonmotorspeedcontroller.com Thu, 25 Jun 2026 03:44:39 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://maxonmotorspeedcontroller.com/2022/03/07/castle-creations-1406-4600kv-motor/ https://maxonmotorspeedcontroller.com/2022/03/07/castle-creations-1406-4600kv-motor/#comments Mon, 07 Mar 2022 19:23:18 +0000 https://maxonmotorspeedcontroller.com/2022/03/07/castle-creations-1406-4600kv-motor/ […]]]>




Castle Creations 1406 4600kv Motor. Motor is brand new, unused in original packaging. Size:Length: 49.5mm Diameter: 36mm Weight (w/wires):197 g / 6.9oz. Cooling Fan:Optional – Coming Soon. Connectors:4mm male Castle Bullet Connectors Items Needed for Operation:Compatible Electronic Speed Control (ESC). Application Guidelines:1:10 scale 2WD SCT, on-road touring, stadium truck and buggies. Recommended ESC(s):Mamba Max Pro, Mamba X, Sidewinder 4 Max. Recommended Vehicle Weight:2WD SCT Trucks up to 5lbs, stadium trucks, buggies, and on-road vehicles up to 4lbs. Tech Notes: Running modes: SmartSense Sensored and an ultra-efficient Sensorless mode Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer tothisdocument for running and maintaining motors in wet environments. This item is in the category “Toys & Games\Radio Control & RC Toys\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers”. The seller is “dcastle5432″ and is located in this country: GB. This item can be shipped to United Kingdom.

• Brand: castle creations
• Compatible Motor Type: Brushless
• Compatible Scale: 1:10

]]> https://maxonmotorspeedcontroller.com/2022/03/07/castle-creations-1406-4600kv-motor/feed/ 0 https://maxonmotorspeedcontroller.com/2021/09/06/hobbywing-ezrun-max10-sct-sensorless-brushless-esc3660sl-motor-combo-4600kv-2/ https://maxonmotorspeedcontroller.com/2021/09/06/hobbywing-ezrun-max10-sct-sensorless-brushless-esc3660sl-motor-combo-4600kv-2/#comments Mon, 06 Sep 2021 16:11:44 +0000 http://maxonmotorspeedcontroller.com/2021/09/06/hobbywing-ezrun-max10-sct-sensorless-brushless-esc3660sl-motor-combo-4600kv-2/ […]]]>



This is the Hobbywing EZRun MAX10 SCT 1/10 Waterproof Brushless ESC and 3660SL Motor Combo. This combo is compatible with up to 2S LiPo power when using the included 4600kV motor, and is the perfect upgrade for your 1/10 scale 4WD truck and monster truck vehicles. NOTE: This motor included in this combo requires 5mm bore pinion gears. High Reliability & Durability: Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility: With incredible acceleration capabilities and a rock-solid, stable output, the MAX10 SCT can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable for All Weather Conditions: The waterproof and dust-proof design allows the MAX10 SCT to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. High Voltage Built-in BEC: The MAX10 SCT has adopted the world’s first HV built-in BEC with an output current of up to 3 Amps and a switchable output voltage of 6-7.4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by 1/10 scale vehicles. Advanced & Secure Electronic Switch: The MAX10 SCT features an electronic switch with a lifespan of over 50,000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design. Regular Firmware Updates Free of Charge: You can upgrade the MAX10 SCT with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates it’s ESC firmware regularly giving you upgraded features more often when available. Maintenance Free: The ESC, minus the cooling fan, is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle big jumps and landings on hard surfaces. Innovative 4-pole-8-magnet “staggered pole” rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners. Built-in temperature sensor and sensor port protect the motor from damage due to overheat when pairing EZRUN 3660 G2 with a EZRUN MAX10 SCT ESC. O-ring seal fitted between the front end bell and motor case isolates screw holes from inner parts to prevent liquid or dust from getting inside and protect motor from damage. Special design implemented by the motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws. Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%). CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness. Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency. Excellent match between EZRUN 3660 G2 with EZRUN MAX10 SCT guarantees users large torque plus a very smooth and linear power band. Motor Type: Sensorless Brushless Motor. Applications: 1/10th Short Course Trucks, Stadium Trucks, Monster Trucks. 2S LiPo: KV 6000. 3S LiPo: KV 4000. 4S LiPo: KV 3000. LiPo/NiMH Cells: 6-12S NiMH, 2-4S LiPo. BEC Output: 6V/7.4V Switchable, Continuous Current of 4A (Switch-mode BEC). Size (LxWxH): 49.0×39.5×34.7mm. Programming Port: FAN/PRG Port. No-Load Current: 7.2A. Motor Diameter & Length: 36mm & 60mm. Shaft Diameter & Length: 5mm & 18.5mm. EZRun Max10 SCT ESC. EZRun 3660SL Brushless Motor (4600kV). The item “Hobbywing EZRun MAX10 SCT Sensorless Brushless ESC/3660SL Motor Combo (4600kV)” is in sale since Wednesday, July 28, 2021. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers”. The seller is “aueracehobbies” and is located in Coshocton, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Type: ESC/MOTOR COMBO
• Compatible Motor Type: Brushless
• Outrunner/Inrunner: Inrunner
• MPN: HWI38010202
• Compatible Vehicle Type: Cars, Trucks & Motorcycles
• Age Level: 12-16 Years
• Brand: Hobbywing
• Model: HWI38010202
• Compatible Scale: 1:10

]]> https://maxonmotorspeedcontroller.com/2021/09/06/hobbywing-ezrun-max10-sct-sensorless-brushless-esc3660sl-motor-combo-4600kv-2/feed/ 0 https://maxonmotorspeedcontroller.com/2021/07/14/hobbywing-combo-max10-sct-esc-3660sl-4600kv-motor/ https://maxonmotorspeedcontroller.com/2021/07/14/hobbywing-combo-max10-sct-esc-3660sl-4600kv-motor/#comments Wed, 14 Jul 2021 05:19:37 +0000 http://maxonmotorspeedcontroller.com/2021/07/14/hobbywing-combo-max10-sct-esc-3660sl-4600kv-motor/ […]]]>


HOBBYWING COMBO MAX10 SCT ESC 3660SL 4600KV MOTOR. The MAX10 SCT ESC is applicable to various 1/10th scale vehicles like trucks, short-course trucks, monster trucks, and etc. Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EzRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applicatinos, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. With incredible acceleration capabilities and a rock-solid, stable output, the MAX10 SCT can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrian. The user will have the choice of adusting the ESC parameters as per his perference and ability. The waterproof and dust-proof design allows the MAX10 SCT to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. You can upgrade the MAX10 SCT with the HobbyWing USB LINK software, a multifunction LCD program box and a laptop. HobbyWing updates its ESC firmware regularly giving you upgraded features more often when available. Hobbywing EzRun MAX10 SCT Features. High Reliability & Durability. Great Flexibility & Versatility. Advanced and Secure Electronic Switch. Applicable to All Weather Conditions. Innovative Filter Capacitor Thermal Protection. Regular Firmware Updates Free of Charge. Input: 2-4S LiPo/6-12 Cells NiMH. BEC Output: Switch Mode:6V/7.4V, 3A. Output Connecotors: 4.0 Bullet Connectors (Female). Fan Size: 25.0×25.0x10.0mm. Fan Voltage Range: 5-7.4V. Program Port: FAN/Program Port. Size: 49.0×39.5×34.7mm. The HobbyWing EzRun 3660 G2 motor features an Innovative 4-pole-8-magnet “staggered pole” rotor (Hobbywing-patented). It has low cogging effect and torque pulsation for improved control feel around corners. The built-in temperature sensor and sensor port protect the motor from damage due to overheating when pairing with an EzRun Max10/Max10 SCT ESC. HobbyWing EzRun 3660 G2 4600KV SL Motor (1/10th Truck) Features. Innovative 4-pole-8-magnet “staggered pole” rotor. Built-in temperature sensor and sensor port. O-ring seal fitted between the front end bell and motor case. Special design motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws. Special technology for temperature control for less heat and more efficiency (efficiency rate of up to 90%). CNC machined aluminium housing, high purity copper windings and advanced rotor structure. Rebuild-able design for easy routine maintenance. No-load Current(A): 7.2. Timing: 0 Degrees(Fixed). Length (mm): 60.00. Shaft Diameter (mm): 5.0. The item “HOBBYWING COMBO MAX10 SCT ESC 3660SL 4600KV MOTOR” is in sale since Monday, November 23, 2020. This item is in the category “Toys & Games\Radio Control & RC Toys\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers”. The seller is “arrowmodels” and is located in Scarborough. This item can be shipped to United Kingdom, United States, Japan, Canada, Ireland, Australia, Germany, France, Greece, Italy, Spain, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, Hungary, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Sweden, Bahrain, Brazil, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Dominican republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El salvador, Trinidad and tobago, Uruguay, Viet nam, Russian federation.

• Brand: Hobbywing
• MPN: HW38010202
• Type: Electronic (ESC)
• EAN: 6938994407403

]]> https://maxonmotorspeedcontroller.com/2021/07/14/hobbywing-combo-max10-sct-esc-3660sl-4600kv-motor/feed/ 0 https://maxonmotorspeedcontroller.com/2021/05/03/castle-creations-mamba-x-110-brushless-combo-with1406-sensored-motor-4600kv-new-2/ https://maxonmotorspeedcontroller.com/2021/05/03/castle-creations-mamba-x-110-brushless-combo-with1406-sensored-motor-4600kv-new-2/#comments Tue, 04 May 2021 04:46:25 +0000 http://maxonmotorspeedcontroller.com/2021/05/03/castle-creations-mamba-x-110-brushless-combo-with1406-sensored-motor-4600kv-new-2/ […]]]>





The Castle Creations Mamba X 1/10 Brushless Combo includes the Mamba X, with the awesome 1406 Sensored motor to create a all in one system perfect for 1/10 scale 2wd short course trucks, stadium trucks and buggies up to 5 pounds, as well as touring cars up to 4 pounds. The Mamba X is going to shake things up. Extremely versatile, and capable of powering a wide variety of applications and vehicles the Mamba X is ideal for racing at the track with your 2wd buggy, bashing through mud puddles in your monster truck, or navigating a hardcore trail with your crawler. The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale race buggies. Through the use of Castle’s Smart Sense technology, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup, and allows the 1406 to deliver PRECISE throttle control and BUTTERY SMOOTH starts – with the RAW POWER and LONGER RUN TIMES that Castle motors are known for. Wide 2S to 6S input voltage range. Sensored Motor Support (Castle X-Series Sensor Harness Included). 8A Adjustable BEC (5.25V-8.0V). Rugged CNC Aluminum Case. Castle Link Programming Support. Removable 30mm Cooling Fan. Integrated 4mm Bullet Connectors. 12 AWG Power Wires. The Mamba X is proudly designed and manufactured in Olathe, Kansas. 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT. Oversized gold plated solder tabs for LESS RESISTANCE and easy soldering. Technology shields magnetic field noise generated from the motor coils and keeps motor and ESC in sync at all times. HIGHER PRECISION and MORE EFFICIENT startups. OPTIMIZED design eliminates the need for mechanical timing adjustments. Sensor alignment method delivers uniform timing and torque in both directions, automatically. REBUILDABLE design allows users to replace front end bell with bearings or rotors with shaft. ROAR standard sensor port and labeled connections. High strength 180°C neodymium sintered magnets. High quality, temperature-stabilized sensors. High-purity, high-temperature copper windings. Hardened stainless steel shaft. 13 AWG high strand wire with silicone insulation. 6061-T6 Billet aluminum heatsink can. High RPM NMB oversized bearings. High quality 0.2mm steel laminations. Low resistance gold plated bullet connectors. Input Voltage Range: 2S LiPo (7.4V) to 6S LiPo (25.2V). BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. Or 8.0V (8A Peak), default 5.5V. Operating Environment: Waterproof design allows for use in nearly any environment. Reversible: Yes, but may be disabled for racing. Cooling Fan: Yes, factory equipped (30mm), fully removable (see Product Use Statements below). Size (LxWxH): 2.14×1.39×1.18 (54.4×35.2×30.0mm). Weight (with wires): 3.56 oz. Connectors: 4.0mm female bullets for motor connection. Items Needed for Operation: Battery Connector. Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg. Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors. Recommended Vehicle Weight: Less than 9bs/4kg, with batteries, ready-to-run. Telemetry Link Capable: Yes. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Input Voltage Range: 2-3S LiPo. Weight (w/wires): 197 g / 6.9oz. Diameter: 1/8 (3.17mm). Cooling Fan: Optional – Coming Soon. Connectors: 4mm male Castle Bullet Connectors. Application Guidelines: 1:10 scale 2WD SCT, on-road touring, stadium truck and buggies. Recommended ESC(s): Mamba Max Pro. Recommended Vehicle Weight: 2WD SCT Trucks up to 5lbs, stadium trucks, bugies, and on-road vehicles up to 4lbs. Tech Notes: Running modes: SMARTSENSE, Sensored, Sensorless. Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, Castle suggests users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack’s suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas Power Connectors, or Deans Ultra Plugs. The item “Castle Creations Mamba X 1/10 Brushless Combo with1406 Sensored Motor 4600kV New” is in sale since Thursday, February 25, 2021. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers”. The seller is “auerace4j3x” and is located in Coshocton, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Modified Item: No
• Custom Bundle: No
• MPN: 010-0155-01
• Brand: Castle Creations
• Model: Mamba X
• Type: Electronic (ESC)
• Compatible Motor Type: Brushless
• Compatible Fuel Type: Electric
• Compatible Scale: 1:10
• Compatible Vehicle Type: Cars, Trucks & Motorcycles

]]> https://maxonmotorspeedcontroller.com/2021/05/03/castle-creations-mamba-x-110-brushless-combo-with1406-sensored-motor-4600kv-new-2/feed/ 0 https://maxonmotorspeedcontroller.com/2021/03/25/hobbywing-max10-sct-esc-3660sl-4600kv-bl-motor-combo-110-truck-stampede/ https://maxonmotorspeedcontroller.com/2021/03/25/hobbywing-max10-sct-esc-3660sl-4600kv-bl-motor-combo-110-truck-stampede/#comments Thu, 25 Mar 2021 10:51:47 +0000 http://maxonmotorspeedcontroller.com/2021/03/25/hobbywing-max10-sct-esc-3660sl-4600kv-bl-motor-combo-110-truck-stampede/ […]]]>


Why shop with us? Brand Names You Can Trust. Radio(s)/Reciver(s). Add our store to your favorite stores and receive our exclusive emails about new items and special promotions! Hobbywing MAX10 SCT ESC / 3660SL 4600KV BL Motor Combo 1/10 Truck Stampede. Brand New in Factory Packaging. In Stock Ships Within 24hrs. Hobbywing EZRun MAX10 SCT Sensorless Brushless ESC/3660SL Motor Combo (4600kV). This is the Hobbywing EZRun MAX10 SCT 1/10 Waterproof Brushless ESC and 3660SL Motor Combo. This combo is compatible with up to 3S LiPo power, and is the perfect upgrade for your 1/10 scale 4WD truck and monster truck vehicles. NOTE: This motor included in this combo requires 5mm bore pinion gears. High Reliability & Durability: Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility: With incredible acceleration capabilities and a rock-solid, stable output, the MAX10 SCT can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable for All Weather Conditions: The waterproof and dust-proof design allows the MAX10 SCT to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. High Voltage Built-in BEC: The MAX10 SCT has adopted the world’s first HV built-in BEC with an output current of up to 3 Amps and a switchable output voltage of 6-7.4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by 1/10 scale vehicles. Advanced & Secure Electronic Switch: The MAX10 SCT features an electronic switch with a lifespan of over 50,000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design. Regular Firmware Updates Free of Charge: You can upgrade the MAX10 SCT with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates it’s ESC firmware regularly giving you upgraded features more often when available. Maintenance Free: The ESC, minus the cooling fan, is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle big jumps and landings on hard surfaces. Innovative 4-pole-8-magnet “staggered pole” rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners. Built-in temperature sensor and sensor port protect the motor from damage due to overheat when pairing EZRUN 3660 G2 with a EZRUN MAX10 SCT ESC. O-ring seal fitted between the front end bell and motor case isolates screw holes from inner parts to prevent liquid or dust from getting inside and protect motor from damage. Special design implemented by the motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws. Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%). CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness. Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency. Excellent match between EZRUN 3660 G2 with EZRUN MAX10 SCT guarantees users large torque plus a very smooth and linear power band. Motor Type: Sensorless Brushless Motor. Applications: 1/10th Short Course Trucks, Stadium Trucks, Monster Trucks. 2S LiPo: KV 6000. 3S LiPo: KV 4000. 4S LiPo: KV 3000. LiPo/NiMH Cells: 6-12S NiMH, 2-4S LiPo. BEC Output: 6V/7.4V Switchable, Continuous Current of 4A (Switch-mode BEC). Size (LxWxH): 49.0×39.5×34.7mm. Programming Port: FAN/PRG Port. No-Load Current: 7.2A. Motor Diameter & Length: 36mm & 60mm. Shaft Diameter & Length: 5mm & 18.5mm. EZRun Max10 SCT ESC. EZRun 3660SL Brushless Motor (4600kV). Please note: I will not put less amount on custom papers, so please don’t ask. You can return any item in Brand New/unopened condition (within 14 days). The item “Hobbywing MAX10 SCT ESC / 3660SL 4600KV BL Motor Combo 1/10 Truck Stampede” is in sale since Friday, July 17, 2020. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers”. The seller is “power_hobby” and is located in Mahwah, New Jersey. This item can be shipped to United States, all countries in Europe, Canada, Japan, Australia.

• Brand: HobbyWing
• MPN: HWI38010202
• upc: 088718507400

]]> https://maxonmotorspeedcontroller.com/2021/03/25/hobbywing-max10-sct-esc-3660sl-4600kv-bl-motor-combo-110-truck-stampede/feed/ 0 https://maxonmotorspeedcontroller.com/2021/01/26/castle-creations-mamba-x-110-brushless-combo-with1406-sensored-motor-4600kv-new/ https://maxonmotorspeedcontroller.com/2021/01/26/castle-creations-mamba-x-110-brushless-combo-with1406-sensored-motor-4600kv-new/#comments Tue, 26 Jan 2021 23:45:39 +0000 http://maxonmotorspeedcontroller.com/2021/01/26/castle-creations-mamba-x-110-brushless-combo-with1406-sensored-motor-4600kv-new/ […]]]>





The Castle Creations Mamba X 1/10 Brushless Combo includes the Mamba X, with the awesome 1406 Sensored motor to create a all in one system perfect for 1/10 scale 2wd short course trucks, stadium trucks and buggies up to 5 pounds, as well as touring cars up to 4 pounds. The Mamba X is going to shake things up. Extremely versatile, and capable of powering a wide variety of applications and vehicles the Mamba X is ideal for racing at the track with your 2wd buggy, bashing through mud puddles in your monster truck, or navigating a hardcore trail with your crawler. The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale race buggies. Through the use of Castle’s Smart Sense technology, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup, and allows the 1406 to deliver PRECISE throttle control and BUTTERY SMOOTH starts – with the RAW POWER and LONGER RUN TIMES that Castle motors are known for. Wide 2S to 6S input voltage range. Sensored Motor Support (Castle X-Series Sensor Harness Included). 8A Adjustable BEC (5.25V-8.0V). Rugged CNC Aluminum Case. Castle Link Programming Support. Removable 30mm Cooling Fan. Integrated 4mm Bullet Connectors. 12 AWG Power Wires. The Mamba X is proudly designed and manufactured in Olathe, Kansas. 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT. Oversized gold plated solder tabs for LESS RESISTANCE and easy soldering. Technology shields magnetic field noise generated from the motor coils and keeps motor and ESC in sync at all times. HIGHER PRECISION and MORE EFFICIENT startups. OPTIMIZED design eliminates the need for mechanical timing adjustments. Sensor alignment method delivers uniform timing and torque in both directions, automatically. REBUILDABLE design allows users to replace front end bell with bearings or rotors with shaft. ROAR standard sensor port and labeled connections. High strength 180°C neodymium sintered magnets. High quality, temperature-stabilized sensors. High-purity, high-temperature copper windings. Hardened stainless steel shaft. 13 AWG high strand wire with silicone insulation. 6061-T6 Billet aluminum heatsink can. High RPM NMB oversized bearings. High quality 0.2mm steel laminations. Low resistance gold plated bullet connectors. Input Voltage Range: 2S LiPo (7.4V) to 6S LiPo (25.2V). BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. Or 8.0V (8A Peak), default 5.5V. Operating Environment: Waterproof design allows for use in nearly any environment. Reversible: Yes, but may be disabled for racing. Cooling Fan: Yes, factory equipped (30mm), fully removable (see Product Use Statements below). Size (LxWxH): 2.14×1.39×1.18 (54.4×35.2×30.0mm). Weight (with wires): 3.56 oz. Connectors: 4.0mm female bullets for motor connection. Items Needed for Operation: Battery Connector. Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg. Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors. Recommended Vehicle Weight: Less than 9bs/4kg, with batteries, ready-to-run. Telemetry Link Capable: Yes. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Input Voltage Range: 2-3S LiPo. Weight (w/wires): 197 g / 6.9oz. Diameter: 1/8 (3.17mm). Cooling Fan: Optional – Coming Soon. Connectors: 4mm male Castle Bullet Connectors. Application Guidelines: 1:10 scale 2WD SCT, on-road touring, stadium truck and buggies. Recommended ESC(s): Mamba Max Pro. Recommended Vehicle Weight: 2WD SCT Trucks up to 5lbs, stadium trucks, bugies, and on-road vehicles up to 4lbs. Tech Notes: Running modes: SMARTSENSE, Sensored, Sensorless. Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, Castle suggests users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack’s suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas Power Connectors, or Deans Ultra Plugs. The item “Castle Creations Mamba X 1/10 Brushless Combo with1406 Sensored Motor 4600kV New” is in sale since Monday, January 11, 2021. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers”. The seller is “auerace4j3x” and is located in Coshocton, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Modified Item: No
• Custom Bundle: No
• MPN: 010-0155-01
• Brand: Castle Creations
• Model: Mamba X
• Type: Electronic (ESC)
• Compatible Motor Type: Brushless
• Compatible Fuel Type: Electric
• Compatible Scale: 1:10
• Compatible Vehicle Type: Cars, Trucks & Motorcycles

]]> https://maxonmotorspeedcontroller.com/2021/01/26/castle-creations-mamba-x-110-brushless-combo-with1406-sensored-motor-4600kv-new/feed/ 0 https://maxonmotorspeedcontroller.com/2021/01/20/hobbywing-ezrun-max10-sct-sensorless-brushless-esc3660sl-motor-combo-4600kv/ https://maxonmotorspeedcontroller.com/2021/01/20/hobbywing-ezrun-max10-sct-sensorless-brushless-esc3660sl-motor-combo-4600kv/#comments Wed, 20 Jan 2021 23:21:40 +0000 http://maxonmotorspeedcontroller.com/2021/01/20/hobbywing-ezrun-max10-sct-sensorless-brushless-esc3660sl-motor-combo-4600kv/ […]]]>



This is the Hobbywing EZRun MAX10 SCT 1/10 Waterproof Brushless ESC and 3660SL Motor Combo. This combo is compatible with up to 2S LiPo power when using the included 4600kV motor, and is the perfect upgrade for your 1/10 scale 4WD truck and monster truck vehicles. NOTE: This motor included in this combo requires 5mm bore pinion gears. High Reliability & Durability: Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility: With incredible acceleration capabilities and a rock-solid, stable output, the MAX10 SCT can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable for All Weather Conditions: The waterproof and dust-proof design allows the MAX10 SCT to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. High Voltage Built-in BEC: The MAX10 SCT has adopted the world’s first HV built-in BEC with an output current of up to 3 Amps and a switchable output voltage of 6-7.4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by 1/10 scale vehicles. Advanced & Secure Electronic Switch: The MAX10 SCT features an electronic switch with a lifespan of over 50,000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design. Regular Firmware Updates Free of Charge: You can upgrade the MAX10 SCT with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates it’s ESC firmware regularly giving you upgraded features more often when available. Maintenance Free: The ESC, minus the cooling fan, is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle big jumps and landings on hard surfaces. Innovative 4-pole-8-magnet “staggered pole” rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners. Built-in temperature sensor and sensor port protect the motor from damage due to overheat when pairing EZRUN 3660 G2 with a EZRUN MAX10 SCT ESC. O-ring seal fitted between the front end bell and motor case isolates screw holes from inner parts to prevent liquid or dust from getting inside and protect motor from damage. Special design implemented by the motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws. Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%). CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness. Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency. Excellent match between EZRUN 3660 G2 with EZRUN MAX10 SCT guarantees users large torque plus a very smooth and linear power band. Motor Type: Sensorless Brushless Motor. Applications: 1/10th Short Course Trucks, Stadium Trucks, Monster Trucks. 2S LiPo: KV 6000. 3S LiPo: KV 4000. 4S LiPo: KV 3000. LiPo/NiMH Cells: 6-12S NiMH, 2-4S LiPo. BEC Output: 6V/7.4V Switchable, Continuous Current of 4A (Switch-mode BEC). Size (LxWxH): 49.0×39.5×34.7mm. Programming Port: FAN/PRG Port. No-Load Current: 7.2A. Motor Diameter & Length: 36mm & 60mm. Shaft Diameter & Length: 5mm & 18.5mm. EZRun Max10 SCT ESC. EZRun 3660SL Brushless Motor (4600kV). The item “Hobbywing EZRun MAX10 SCT Sensorless Brushless ESC/3660SL Motor Combo (4600kV)” is in sale since Thursday, October 15, 2020. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers”. The seller is “auerace4j3x” and is located in Coshocton, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Type: ESC/MOTOR COMBO
• MPN: 38010202
• Compatible Vehicle Type: Cars, Trucks & Motorcycles
• Compatible Scale: 1:10
• Brand: Hobbywing
• Compatible Motor Type: Brushless

]]> https://maxonmotorspeedcontroller.com/2021/01/20/hobbywing-ezrun-max10-sct-sensorless-brushless-esc3660sl-motor-combo-4600kv/feed/ 0 https://maxonmotorspeedcontroller.com/2020/08/02/cse010-0115-05-castle-creations-sidewinder-sv3-wp-110-escmotor-combo-4600kv/ https://maxonmotorspeedcontroller.com/2020/08/02/cse010-0115-05-castle-creations-sidewinder-sv3-wp-110-escmotor-combo-4600kv/#comments Sun, 02 Aug 2020 19:32:00 +0000 http://maxonmotorspeedcontroller.com/2020/08/02/cse010-0115-05-castle-creations-sidewinder-sv3-wp-110-escmotor-combo-4600kv/ […]]]>





This is the Castle Creations Sidewinder SV3 WP 1/10 ESC and Brushless Motor Combo, including a Neu-Castle 1406 4600kV Brushless and Sensored Motor. Castles Sidewinder ESC is now waterproof! The Sidewinder 3 can power crawlers on water filled trails, AWD’s in rain soaked parking lots, and SCT’s on adventures through muddy fields. Drivers can now give in to those irresistible urges to drive in the mud or rip through puddles without damaging their ESC. Designed for 1/10th The Sidewinder 3 is a great fit for 1/10th off-road, on-road, and rock crawlers running up to 3S LiPo. It features updated circuitry for faster response time and improved reliability. For more than a decade Castle has been providing award winning brushless sensorless motors to R/C enthusiasts worldwide. In response to overwhelming requests by their customers, Castle has brought technological advancements together that will deliver unprecedented performance in our their Sensored motor Line. ESC Specifications: Input Voltage: MIN: 2s LiPo; MAX: 3s LiPo Operating Environment: Waterproof design allows for use in nearly any environment. Brake: Proportional Reversible: Yes – with lockout Size (LxWxH): 1.93×1.48×0.79 (49x38x20mm) Weight (w/127mm long battery wires and no battery connector): 1.96 oz (55.5g). Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Motor Specifications: Input Voltage Range: 2-3S LiPo Kv: 4600 Max. Recommended Vehicle Weight: 2WD SCT Trucks up to 5lbs, stadium trucks, bugies, and on-road vehicles up to 4lbs. Tech Notes: Running modes: SMARTSENSE, Sensored, Sensorless. The item “CSE010-0115-05 Castle Creations Sidewinder SV3 WP 1/10 ESC/Motor Combo (4600kV)” is in sale since Friday, March 15, 2019. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers”. The seller is “amain” and is located in Chico, California. This item can be shipped worldwide.

• Brand: Castle Creations
• MPN: CSE010011505
• Country Of Manufacture: United States
• Harmonized System Code: 9503.00.00.90
• Motor Kv: 4,000kV
• Motor Type: Brushless
• Sensor Type: Sensorless
• Scale: 1/10 Scale

]]> https://maxonmotorspeedcontroller.com/2020/08/02/cse010-0115-05-castle-creations-sidewinder-sv3-wp-110-escmotor-combo-4600kv/feed/ 0 https://maxonmotorspeedcontroller.com/2020/04/18/hobbywing-ezrun-max10-sct-120a-esc-g2-4600kv-motor-withfan-mount-combo-cb1199/ https://maxonmotorspeedcontroller.com/2020/04/18/hobbywing-ezrun-max10-sct-120a-esc-g2-4600kv-motor-withfan-mount-combo-cb1199/#comments Sun, 19 Apr 2020 04:49:50 +0000 http://maxonmotorspeedcontroller.com/2020/04/18/hobbywing-ezrun-max10-sct-120a-esc-g2-4600kv-motor-withfan-mount-combo-cb1199/ […]]]>





Hobbywing EZRUN MAX10 SCT 120A Waterproof ESC w/ 3660 G2 4600KV Motor w/ YR Tornado Fan & Mount Combo #CB1199. Hobbywing EZRUN 3660 G2 4600KV 4-Pole Sensorless Brushless Motor For 1/10 RC Car #EZRUN-3660-G2 4600KV. Hobbywing EZRUN MAX10 SCT 120A Waterproof Sensorless Brushless ESC For 1/10 RC #EZRUN MAX10 SCT. Yeah Racing Aluminum 7075 Fan Mount w/ 30mm Tornado Fan for 540 Motor Black #YA-0525BK. This is the Hobbywing EZRUN 3660 G2 4-Pole Sensorless Brushless Motor. The 4-pole design of the 3660 series will guarantee the motor produces large amounts of torque, a much faster acceleration response and a very stable output of power to the drivetrain. For: 1/10 RC Car. Low Cogging Torque: The first motor adopted the innovative 4-pole-8-magnet “staggered pole” rotor (Hobbywing-patented design) (in the RC field) has the extremely low cogging effect and low torque pulsation (it’s reduced by 85% when comparing with conventional 1/10th scale 4-pole motors). Motor Thermal Protection: When pairing the EzRun 3652/3660 G2 with a Hobbywing EzRun MAX10-SCT or MAX10 ESC, the built-in temperature sensor and sensor port at the load end (for connecting to ESC) will make the motor thermal protection available to protect the motor from damage due to overheat. S temperature control technology has been designed to protect the motor from being damaged by heat thus less heat more efficient the motor will run and perform. The output performance of this motor has an efficiency rate of up to 90%, a leading level in the RC world. Quality Materials & Excellent Design: The use of double insulated windings (240 R-leveled), high-intensity adhesive (340), Japanese bearings and silicon steel sheets guarantees users the outstanding performance and super durability. The wheel hub design of the front & rear end bells reduces the motor weight. Compatible (with the EZRUN MAX10-SCT/MAX10 ESC): When pairing the EzRun 3652/3660 G2 motor with a Hobbwing EzRun MAX10-SCT/ MAX10 ESC, the excellent match between ESC and motor will give you large torque plus a very smooth and linear power band. No Load Current (A): 7.2V. Applications: 1/10 short course truck, truck, monster truck (4wd). Hobbywing EZRUN 3660 G2 4600KV 4-Pole Sensorless Brushless Motor (1 pc). 21 Tooth, 48 Pitch Pinion gear w/ 5mm bore (1 pc). This is the Hobbywing EZRun MAX10 SCT V3 1/10 Scale Waterproof Brushless ESC. Compatible with 2-4S LiPo power, the MAX10 SCT provides the ultimate power upgrade solution for many popular 1/10 scale vehicles. High Reliability & Durability: Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility: With incredible acceleration capabilities and a rock-solid, stable output, the MAX10 SCT can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable for All Weather Conditions: The waterproof and dust-proof design allows the MAX10 SCT to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. High Voltage Built-in BEC: The MAX10 SCT has adopted the world’s first HV built-in BEC with an output current of up to 3 Amps and a switchable output voltage of 6-7.4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by 1/10 scale vehicles. Advanced & Secure Electronic Switch: The MAX10 SCT features an electronic switch with a lifespan of over 50,000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design. Regular Firmware Updates Free of Charge: You can upgrade the MAX10 SCT with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates it’s ESC firmware regularly giving you upgraded features more often when available. Maintenance Free: The ESC, minus the cooling fan, is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle big jumps and landings on hard surfaces. Motor Type: Sensorless Brushless Motor. Applications: 1/10th Short Course Trucks, Stadium Trucks, Monster Trucks. 2S LiPo: KV 6000. 3S LiPo: KV 4000. 4S LiPo: KV 3000. LiPo/NiMH Cells: 6-12S NiMH, 2-4S LiPo. BEC Output: 6V/7.4V Switchable, Continuous Current of 3A (Switch-mode BEC). Cooling Fan: Powered by the stable BEC voltage of 5V-7.4V. Connectors: Input End: None, Output End: Female 4.0mm Gold Connectors (pre-soldered onto the PCB of the speed controller). Size (LxWxH): 49.0×39.5×34.7mm. Programming Port: FAN/PRG Port. (1) MAX10 SCT ESC. (3) 12 AWG, 200C Black wires for a brushless motor. (1) 12 AWG, 200C Red / Black wires for battery input. (1) Double side tape. (2) Heat shrink tube. Fan mount for keeping your motor cool! Features a wire hiding clamp, where you can neatly tuck your fan wire underneath and can prevent it from catching onto moving parts! Able to fit either 30 or 40mm fans! A setscrew at the top allows you to tighten the clamp which prevents it from moving when you have set it at your desired angle. Packaged with a 30mm fan! Aluminum 7075 Fan Mount (1 Pc). Tornado 30mm Fan (1 pc). The item “Hobbywing EZRUN MAX10 SCT 120A ESC G2 4600KV Motor withFan & Mount Combo #CB1199″ is in sale since Monday, August 20, 2018. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers”. The seller is “rcmart” and is located in HK. This item can be shipped worldwide.

• For Vehicle Brand: Any Brand
• Scale: 1:10
• Gender: Boys & Girls
• MPN: CB1199
• Brand: Hobbywing
• Part: Speed Controllers
• For Vehicle Type: Car
• Fuel Source: Electric

]]> https://maxonmotorspeedcontroller.com/2020/04/18/hobbywing-ezrun-max10-sct-120a-esc-g2-4600kv-motor-withfan-mount-combo-cb1199/feed/ 0 https://maxonmotorspeedcontroller.com/2020/03/29/hobbywing-ezrun-max10-sct-120a-esc-3660-sl-g2-4600kv-brushless-motor-110-car/ https://maxonmotorspeedcontroller.com/2020/03/29/hobbywing-ezrun-max10-sct-120a-esc-3660-sl-g2-4600kv-brushless-motor-110-car/#comments Mon, 30 Mar 2020 04:32:23 +0000 http://maxonmotorspeedcontroller.com/2020/03/29/hobbywing-ezrun-max10-sct-120a-esc-3660-sl-g2-4600kv-brushless-motor-110-car/ […]]]>







Racing Drones / UAVs. Filming Drones / UAVs. Frame kit & Parts. Camera & Video Transmission. Helicopter Ready to Fly. Ready to Fly Planes. Walkera Runner 250 / 250R. Walkera F210 / F210 3D. Walkera Rodeo 110 Parts. WALKERA Master CP Parts. Walkera Scout X4 Parts. Walkera Tali H500 Parts. CopterX 450 BA Parts. CopterX 450 PRO Parts. Trex / CopterX 450 Parts. Handheld Gimbal / Camera. You will receive our newsletter once a week. Hobbywing EZRUN MAX10-SCT 120A ESC +3660 SL G2 4600KV Brushless Motor 1/10 Car. Hobbywing COMBO-MAX10 SCT-3660SL-4600KV EZRUN MAX10-SCT 120A ESC + 3660 SL G2 4600KV Brushless motor Combo for 1/10 Touring Car, Buggy, Truggy and Truck. Hobbywing EZRUN MAX10-SCT 120A Water-proof Brushless ESC for 1/10 Touring Car, Buggy, Truggy and Truck. Great Flexibility & Versatility. With incredible acceleration capabilities and a rock-solid, stable output. The MAX10 SCT can handle instant full-torque start-ups for wheelies. High-speed racing on straightaways and powering through the bumpiest terrian. The user will have the choice of adusting the ESC parameters as per his perference and ability. Innovative Filter Capacitor Thermal Protection. The filter capacitor thermal protection first implemented in the MAX10 SCT will effectively protect. Capacitors from exploding and causing irreversible damage to the ESC due to overload. This MAX10 SCT ESC is applicable to various 1/10th scale vehicles like. Trucks, short-course trucks, monster trucks, and etc. 1/10 Truck , 1/10 SCT and 1/10 Monster. Motor Type: Sensored/Sensorless Brushless Motor. Applications: 1/10th Touring Car, Buggy, Truggy and Monster Truck. LiPo/NiMH Cells: 2-4S LiPo/6-12S NiMH. BEC Output: 6V/7.4V Switchable, Continuous Current of 4A (Switch-mode). Cooling Fan: Powered by the stable BEC voltage of 6V/7.4V. Size/Weight: 49 x 39.5 x 34.7mm/105g. Programming Port: FAN/PRG Port. Brushless Motor Limit with 2S LiPo / 6 Cell NiMH: KV less than or equal to 6000 (3656 size motor). Brushless Motor Limit with 3S LiPo / 9 Cell NiMH: KV less than or equal to 4000 (3656 size motor). Brushless Motor Limit with 45 LiPo / 12 Cell NiMH: KV less than or equal to 3000 (3656 size motor). Input End: No Connectors. Output End: 4.0mm Female Gold Connectors (pre-soldered onto the PCB of the ESC). EZRUN 3660 SL G2 Brushless Motor. Innovative 4-pole-8-magnet “staggered pole” rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners. Built-in temperature sensor and sensor port protect the motor from damage due to overheat when pairing EZRUN 3660 G2 with a EZRUN MAX10 SCT ESC. O-ring seal fitted between the front end bell and motor case isolates screw holes from inner parts to prevent liquid or dust from getting inside and protect motor from damage. Special design implemented by the motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws. Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%). CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness. Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency. Excellent match between EZRUN 3660 G2 with EZRUN MAX10 SCT guarantees users large torque plus a very smooth and linear power band. EZRUN 3660 SL G2 4600KV Brushless Motor. No-load Current: 7.2A. Motor Diameter & Length: =36 / L=60. Shaft Diameter & Length: =5 / L=18.5. Suitable: 1/10th Short-course Truck/truck/monster truck4WD. 1 x Ezrun Max10 SCT ESC. 1 x Ezrun 3660 SL brushless motor. Supportive accessories (double side tape, etc). Cars, Trucks & Motorcycles. Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses. Item Defective On Arrival. We may ask you to send back the defective item. When you return the item, it should come with all included accessories such as the cable, charger and battery. If an item is missing we will ask you to pay for them. Dislike Items or order by mistake. You need to offer photos or videos to show us the item is in the same condition as when it was delivered to you, without any other damage or defective parts. Broken within 14 days. Artificial factors such as dis-assembly, misuse, drops, crashes or falls, water damage, unofficial firmware or software modifications or any others causes or damage are NOT covered. We will only provide advisory services to help you solve the problem. The item “Hobbywing EZRUN MAX10-SCT 120A ESC +3660 SL G2 4600KV Brushless Motor 1/10 Car” is in sale since Wednesday, October 4, 2017. This item is in the category “Toys & Games\Radio Control & RC Toys\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Speed Controllers”. The seller is “besthobbysite4uk” and is located in Shenzhen. This item can be shipped worldwide.

• EAN: Does not apply
• UPC: Does not apply
• Brand: Hobbywing
• MPN: COMBO-MAX10 SCT-3660SL-4600KV
• Compatible Scale: 1:10
• Type: Electronic (ESC)
• Compatible Vehicle Type: Cars, Trucks & Motorcycles
• Compatible Motor Type: Brushless
• Model: COMBO-MAX10 SCT-3660SL-4600KV
• Country/Region of Manufacture: China
• Compatible Fuel Type: Electric

]]> https://maxonmotorspeedcontroller.com/2020/03/29/hobbywing-ezrun-max10-sct-120a-esc-3660-sl-g2-4600kv-brushless-motor-110-car/feed/ 0