https://maxonmotorspeedcontroller.com Sat, 02 May 2026 05:55:40 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://maxonmotorspeedcontroller.com/2019/10/27/cnc-air-cooled-engraver-spindle-motor-dc12v-48v-12000r-er11-200with300with400with600w/ https://maxonmotorspeedcontroller.com/2019/10/27/cnc-air-cooled-engraver-spindle-motor-dc12v-48v-12000r-er11-200with300with400with600w/#comments Sun, 27 Oct 2019 15:38:41 +0000 http://maxonmotorspeedcontroller.com/2019/10/27/cnc-air-cooled-engraver-spindle-motor-dc12v-48v-12000r-er11-200with300with400with600w/ […]]]>













200W/300W/400W/500W(ER11), 600W(ER16). Diameter:52mm 57mm(600W). Axis collet Length: 48mm. Diameter of Axis collect holder:16mm. Repeat accuracy: 0.01-0.03mm. ER11 collect: 3.175mm. Wide voltage PWM DC brush motor speed controller. Applies to DC12-60V low voltage permanent magnet brushed DC motor. Operating Voltage: Wide Voltage (DC) DC12V-DC60V (Max 65V). A: Default potentiometer control (5K-100K), defaults 10K. B: MACH3 -PWM speed control signal input, external PWM input requirements: level 3.5-12V VPP, frequency 1K-10KHZ, suitable for MACH3 spindle speed control. Rated current: 10A, overload and short circuit protection current 12A. (Over-current cut output, overcurrent indicator flashes, the potential light is off, overcurrent lift). Prevent excessive current caused by the motor and power damage (default 0 seconds soft start), 0-5 seconds adjustable. Control power: 12V120W, 24V240W, 36V360W, 48V480W, 60V600W. Dimensions: Length 75mm Width 75mm high 42mm. Pulse width modulation range: 0% -100%. When using a PWM signal control mode, need to unplug Potentiometer, or it will be unable to use PWM mode. Other Accessary As your Choice. The item “CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11 200With300With400With600W” is in sale since Friday, July 21, 2017. This item is in the category “Business, Office & Industrial\Industrial Automation & Motion Controls\Electric Motors\Electric Motor Parts & Accessories”. The seller is “dst2015″ and is located in China. This item can be shipped worldwide.

• Brand: Unbranded/Generic
• MPN: Does Not Apply

]]> https://maxonmotorspeedcontroller.com/2019/10/27/cnc-air-cooled-engraver-spindle-motor-dc12v-48v-12000r-er11-200with300with400with600w/feed/ 0 https://maxonmotorspeedcontroller.com/2019/09/02/200with300with400with600w-cnc-air-cooled-engraver-spindle-motor-dc12v-48v-12000r-er11-2/ https://maxonmotorspeedcontroller.com/2019/09/02/200with300with400with600w-cnc-air-cooled-engraver-spindle-motor-dc12v-48v-12000r-er11-2/#comments Mon, 02 Sep 2019 12:40:49 +0000 http://maxonmotorspeedcontroller.com/2019/09/02/200with300with400with600w-cnc-air-cooled-engraver-spindle-motor-dc12v-48v-12000r-er11-2/ 2 megohms Dielectric strength: 400V Diameter: 52mm Chuck Part Length: Arbor parts 35mm, (including nuts […]]]>













DIY 400W Air Cooled Spindle Motor Engraving Milling DC 12V-48V 12000rpm 3.175mm. M Insulation resistance:> 2 megohms Dielectric strength: 400V Diameter: 52mm Chuck Part Length: Arbor parts 35mm, (including nuts and sandwich 43mm) Part chuck diameter: 16mm Motor length: 185mm (including gripping parts and motor) Spindle Net Weight: 0.9KG Spindle runout of about 0.01-0.04. Can be used for engraving metal or nonmetal materials. This comes with air-cooled spindle can work long hours. Suitable for carving PCB, acrylic, drilling Package Included. 1 x 400W Air cooled Spindle motor. Other Accessary as your Choice. The item “200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11″ is in sale since Wednesday, July 26, 2017. This item is in the category “Industrial\Automation, Motors & Drives\Electric Motors\General Purpose Motors”. The seller is “dst2015″ and is located in China. This item can be shipped worldwide.

• Brand: Unbranded
• MPN: Does Not Apply

]]> https://maxonmotorspeedcontroller.com/2019/09/02/200with300with400with600w-cnc-air-cooled-engraver-spindle-motor-dc12v-48v-12000r-er11-2/feed/ 0 https://maxonmotorspeedcontroller.com/2019/07/02/200with300with400with600w-cnc-air-cooled-engraver-spindle-motor-dc12v-48v-12000r-er11/ https://maxonmotorspeedcontroller.com/2019/07/02/200with300with400with600w-cnc-air-cooled-engraver-spindle-motor-dc12v-48v-12000r-er11/#comments Tue, 02 Jul 2019 20:45:46 +0000 http://maxonmotorspeedcontroller.com/2019/07/02/200with300with400with600w-cnc-air-cooled-engraver-spindle-motor-dc12v-48v-12000r-er11/ […]]]>













200W/300W/400W/500W(ER11), 600W(ER16). Diameter:52mm 57mm(600W). Axis collet Length: 48mm. Diameter of Axis collect holder:16mm. Repeat accuracy: 0.01-0.03mm. ER11 collect: 3.175mm. Wide voltage PWM DC brush motor speed controller. Applies to DC12-60V low voltage permanent magnet brushed DC motor. Operating Voltage: Wide Voltage (DC) DC12V-DC60V (Max 65V). A: Default potentiometer control (5K-100K), defaults 10K. B: MACH3 -PWM speed control signal input, external PWM input requirements: level 3.5-12V VPP, frequency 1K-10KHZ, suitable for MACH3 spindle speed control. Rated current: 10A, overload and short circuit protection current 12A. (Over-current cut output, overcurrent indicator flashes, the potential light is off, overcurrent lift). Prevent excessive current caused by the motor and power damage (default 0 seconds soft start), 0-5 seconds adjustable. Control power: 12V120W, 24V240W, 36V360W, 48V480W, 60V600W. Dimensions: Length 75mm Width 75mm high 42mm. Pulse width modulation range: 0% -100%. When using a PWM signal control mode, need to unplug Potentiometer, or it will be unable to use PWM mode. Other Accessary As your Choice. The item “200With300With400With600W CNC Air cooled Engraver Spindle Motor DC12V-48V 12000r ER11″ is in sale since Wednesday, July 26, 2017. This item is in the category “Business & Industrial\Automation, Motors & Drives\Electric Motors\General Purpose Motors”. The seller is “imix-mart” and is located in China. This item can be shipped worldwide.

• Brand: Unbranded/Generic
• MPN: Does not apply
• Country/Region of Manufacture: China

]]> https://maxonmotorspeedcontroller.com/2019/07/02/200with300with400with600w-cnc-air-cooled-engraver-spindle-motor-dc12v-48v-12000r-er11/feed/ 0